User Manual Part 3

Wireless Security
4020210 Rev
A
123
2 Click Wireless. The Wireless Summary screen opens.
3 Click Security. The Wireless -- Security screen opens.
4 In the Network Authentication field, select Mixed WPA2 Personal/WPA
Personal from the drop-down list.
5 Select Enabled or Disabled to enable or disable your Serial Number Encryption
function. Your serial number will be printed on the back label of your device. If
you enable this function, the system will automatically use your serial number as
the network key for your WEP encryption.
6 In the WPA Pre-Shared Key field, enter a shared Key (8-63 characters). The
system will periodically generate a dynamic key based on the shared key.
7 In the WPA Group Rekey Interval field, enter the group key renewal time period
(in seconds). This time defines how often the dynamic key is regenerated
8 In the WPA Encryption field, select the encryption from the drop-down list.
9 Click Save/Apply to save your settings.