User Manual Part 3

Wi-Fi Protected Setup

4020210 Rev

135

Wi-Fi Protected Setup

Wi-Fi Protected Setup (WPS) is a standard for easy and secure establishment of a

wireless home network.

You can choose to use either the PBC or PIN method for connecting the wireless

networks using WPS. But first, you will still need to configure the appropriate

authentication on your router. For more information, see Security Configuration (on

page

141).

Note: Ensure that your wireless client supports WPS. If your wireless client does not

support WPS, you cannot use this functionality.

Path: Home Network > Wireless > Wi-Fi Protected Setup

PBC Method

The PBC method requires the user to press a button (either actual or virtual) on both

the DDR2200 and the new wireless client device to establish the wireless connection.

To set up your wireless network using the PBC method, complete the following

steps.

1 Click Home Network on the main screen.

2 Click Wi-Fi Protected Setup. The Wi-Fi Protected Setup screen opens.

3 For the WPS status drop-down field, select Enabled to enable the WPS status.