User Manual Part 3

Cha
p
te
r
5 Home Network Confi
g
uration
136 4020210 Rev
A
4 Click the button at the right-hand-side on the page or the Wi-Fi-sec button on the
device. Then, within 2 minutes, push another button on your client adapter's
WPS setup screen. It should start the process of configuring the wireless security
on your client station.
PIN Method
The PIN method requires the user to enter a personal identification number (PIN)
from a label on the new device to establish the wireless connection.
To set up your wireless network using a PIN:
1 Click Home Network on the main screen.
2 Click Wi-Fi Protected Setup. The Wi-Fi Protected Setup screen opens.
3 For the WPS status drop-down field, select Enabled to enable the WPS status.
4 In the PIN field, enter the same PIN number (8-digit number, sometimes it will
be shipped with your client's adapter if it supports WPS) for both of the wireless
router and station. Then click Register to start the process of configuring the
wireless security on your client station.