User Manual Part 3

Cha

6 Securit

Confi

uration

150 4020210

Rev

3 Click Add. The Add IP Filter Incoming screen opens.

4 In the Filter Name field, enter the name of the filter.

5 In the Protocol field, select one of the following protocols:

 TCP/UDP

 TCP

 UDP

 ICMP

6 In the Source IP address field, enter the source IP address of the server sending

the incoming packets.

7 In the Source Subnet Mask field, enter the subnet mask of the server sending the

incoming packets.

8 In the Source Port field, enter the port number of the server sending the

incoming packets. You can enter one port or a range of ports using the following

format: port or port:port.

Example: 0:5 indicates ports 0 through 5.

9 In the Destination IP address field, enter the destination IP address for the server

receiving the packets.

10 In the Destination Subnet Mask field, enter the subnet mask for the server

receiving the packets.