User Manual Part 4

Cha
p
te
r
7 Advanced Confi
g
uration
208 4020210 Rev
A
Static Route
The Residential Gateway lets you set up static routes when routing packets from a
specific network to another.
Path: Advanced > IP Networking > Routing > Static Route
To add a static routing entry, complete the following steps.
1 Click Advanced on the main screen.
2 Click IP Networking. The NAT screen opens.
3 Click Routing. The Routing screen opens.
4 Click Static Route. The Device Info -- Route screen opens.
5 Click Add to add a new entry.
6 Enter the Destination Network Address which should be a network ID for the
destined network.
7 Enter the Subnet Mask for the destined network.
8 Select Use Gateway IP Address and identify the Gateway's IP Address to which
the packet is forwarded.
9 Select Use Interface for the interface that is used to forward the packet from the
drop-down menu.
10 Click Save/Apply at the bottom of the screen.