User's Manual Part 1

User’s Guide Chapter 7 – Reference Manual
Figure 132 – Upload Configuration File
Flash – click the button to apply configuration setting to the device.
System | Configuration | Pronto
The goal of the pronto-compatible agent program is to ensure that a partner’s hotspot is interoperable
with Pronto’s Hotspot OSS. Pronto compatibility agent is used to download and overwrite current
configuration (only some parameters which are listed below) from pronto server using WEB proxy. On
device boot only these parameters will be overwritten:
 LAN IP.
 WLAN (wireless LAN) IP.
 LAN DHCP range, DHCP default lease time, max lease time.
 WLAN DHCP range, DHCP default lease time, max lease time.
 WLAN channel.
 WLAN SSID.
 WEP key length (64-bit or 128-bit).
 WEP key format (HEX).
 SMTP server IP and port.
 Location name.
 Walled garden entries.
 Default RADIUS authentication, accounting and accounting backup servers IP.
 Default RADIUS authentication, accounting and accounting backup shared secrets.
 SNMP Read-Only and Read-Write communities.
 SNMP traps host. There will be created 3 traps with different trap types (v1, v2, inform) on the
same host.
By default Pronto feature is disabled:
Figure 133 – Default Pronto Settings
Gold pronto status – select pronto compatibility agent status [enable/disable].
HNS server URL – specify HNS server URL.
Heartbeat interval – specify interval between heartbeat messages in seconds: 1-4 numbers [0-3600],
no spaces allowed. ‘0’ means that heartbeat is disabled. No heartbeat value specified - system will
use external server value. Heartbeat messages are sending between the nodes that indicate a node
is up and running.
Remote host – specify remote host [IP address or host name].
Remote port – specify remote host port number: 1-5 numbers, no spaces allowed, [1-65535].
Gemtek Systems Page 95