User's Manual Part 2

User’s Guide Appendix
Acct-Session-Time 46 Integer X
Call duration in seconds
(already compensated for idle
timeout)
Acct-Input-Packets 47 Integer X
Indicates how many packets
have been received from
the port over the course of
this service being provided
Acct-Output
Packets
48 Integer X
Indicates how many packets
have been sent to the port in
the course of delivering this
service
Acct-Terminate-
Cause
49 Integer X
1=Explicit Logoff, 4=Idle
Timeout, 5=Session Timeout,
6=Admin Reset, 9=NAS
Error, 10=NAS Request,
11=NAS Reboot
Acct-Input-
Gigawords
52 Integer X
This attribute indicates how
many times the Acct-Input-
Octets counter has wrapped
around 2
32
over the course of
this service being provided
Acct-Output-
Gigawords
53 Integer X
This attribute indicates how
many times the Acct-Output-
Octets counter has wrapped
around 2
32
in the course of
delivering this service
NAS-Port-Type 61 Integer X X 15=Ethernet, 19=802.11
Acct-Interim-Interval 85 Integer X
Interval (seconds) to send
accounting updates
Vendor Specific Attributes
The Wi-Fi Alliance recommends a list of certain Vendor Specific Attributes (VSA). The VSA values are
intended to provide location information to the backend processing system or to deliver service type
information back to the Hotspot-in-a-Box.
The Wi-Fi Alliance has registered an IANA Private Enterprise Number (PEN) of 14122, which can be
used to pass Vendor-Specific attributes to international roaming partners.
WISPr Vendor Specific
Atributes
# Type Auth Req Auth
Reply
Acctg Req Comment
Location-ID 1 String X X Hotspot Location Identifier
Location-Name 2 String X X
Hotspot Location and
Operator’s Name
Logoff-URL 3 String X
URL for user to perform
explicit logoff
Redirection-URL 4 String X URL of Start Page
Bandwidth-Min-Up 5 Integer X Minimum Transmit Rate (bps)
Bandwidth-Min-
Down
6 Integer X Minimum Receive Rate (bps)
Bandwidth-Max-Up 7 Integer X
Maximum Transmit Rate
(bps)
Bandwidth-Max-
Down
8 Integer X Maximum Receive Rate (bps)
Gemtek Systems Page 134