User Manual

ManualsBrandsGemtek Technology ManualsElectronicsWireless Video Client

Data Sheet

Page 1 of 5

Cisco VEN401 plus VEN402 Wireless Bridge Solution

Optimized for Video

Highlights

• Adds Wireless-N network connectivity between any Game Consoles, Digital

Video Recorders (DVRs), and Digital Media Adapters (DMAs) and the

customers Broadband Residential Gateway

• Complies with IEEE 802.11n draft 2.0 (5 GHz) standards

• Wi-Fi certified to ensure interoperability

• Industrial-strength wireless encryption WPA2™ to ensure security

• Easy-to-use Wi-Fi Protected Setup (WPS) for fast, simple and secured setup

• The VEN401 Access Point provides multiple SSIDs to VLAN pairings so that

parents can control the content that a TV has access to

• Equipped with one 10/100 Base-T auto-crossover (MDI/MDI-X) port

• Works without drivers on Windows®-, Macintosh®-, Linux®-based

devices— it just needs an Ethernet port to connect with!

• The VEN401 (Access Point) plus VEN402 (Client) are available as a pre-

configured bundle and packaged together

Optimized for Video

Cisco’s VEN401 plus VEN402 Wireless Video Bridge solution is optimized for

connecting Video devices within the Connected Home without the need for wires.

Users are now free to place their Televisions and video devices most anywhere in

the home that compliments their lifestyle and living environment. The small form

factor and unique design of the VEN401 plus VEN402 provides a stylish solution

without the need to pull wires through walls or along the floor board. By pairing

the two devices in the 5GHz band, the video stream is able to pass between the

two devices at a frequency that is minimally used by any other devices. It’s also

ideal for wirelessly sharing music, photos, movies, and other files around the

home.

Since the Wireless Video Bridge solution is based on IEEE802.11n standards-

based Wi-Fi technology, it can pair with other video products that support the

same Wi-Fi standard. Additionally, the VEN401 plus VEN402 pair can also be

used to connect digital video recorders, set-top boxes or computers to your

Wireless-N network. One can replace their wired-Ethernet connections for

printers, scanners, cameras, storage devices, notebooks or desktop computers to

wireless connections or add the devices wirelessly to their existing network.

Cisco’s VEN401 plus VEN402 Wireless Video Bridge solution works with any

platform and under any operating system. Through use of the Wi-Fi Protected

Summary of content (9 pages)

PAGE 1
Data Sheet Cisco VEN401 plus VEN402 Wireless Bridge Solution Optimized for Video Highlights • Adds Wireless-N network connectivity between any Game Consoles, Digital Video Recorders (DVRs), and Digital Media Adapters (DMAs) and the customers Broadband Residential Gateway • Complies with IEEE 802.11n draft 2.
PAGE 2
Data Sheet Setup™ secure connections are created with a simple push of a button. Additionally, the connection is protected with encrypted, industrial-strength Wi-Fi Protected Access (WPA) security to ensure that ones personal content is protected from unauthorized access methods. Each Wireless Video Bridge bundle is preconfigured at the factory with a unique set of Wi-Fi Security settings including, SSID, WPA2 Pre-Shared Key and WPS Pin.
PAGE 3
Data Sheet Figure 1. VEN401 Wireless Access Point Figure 2. Table 1. VEN402 Wireless Client Hardware Features Feature Description Processor Broadcom 4717 (enhanced) Memory 8 Mb Flash, 32 Mb DRAM DDR2 Wi-Fi IEEE 802.11n 5GHz Draft 2.0 Wi-Fi Antenna 2x3 PiFa and Internal Omni Directional antenna’s Ethernet Interfaces 1x 10/100 Base-T Ethernet Industrial Design Custom ID with added option for Optical Interface and Fiber splice tray Table 2.
PAGE 4
Data Sheet Product Specifications Table 4. Product Specifications Specification Value Interfaces Wi-Fi ● IEEE 802.11n 5GHz only, Draft 2.0 ● 802.
PAGE 5
Data Sheet Table 5. • • • • • • • Table 6. • • • Packaging Contents Wireless Video Bridge Access Point (Connects to a RGW) Wireless Video Bridge Client (Connects to a STB, DVR, etc.) Qty. 2 Power adaptors Qty. 2 Ethernet network cables Printed FAQ Printed Quick Install Guide CD: User Manual, OS/GPL and Software license declarations and DOC Minimum Installation Requirements Wireless A Residential Gateway device with a spare Ethernet Port Wireless Set Top Box, DVR, etc.
PAGE 6
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 7
Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.
PAGE 8
Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
PAGE 9
0560 Česky [Czech] Dansk [Danish] Deutsch [German] Eesti [Estonian] English Español [Spanish] Ελληνική [Greek] Français [French] Italiano [Italian] Latviski [Latvian] Lietuvių [Lithuanian] Nederlands [Dutch] Malti [Maltese] Magyar [Hungarian] Polski [Polish] Português [Portuguese] Slovensko [Slovenian] Slovensky [Slovak] Suomi [Finnish] Svenska [Swedish] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.