User Manual

7
3.1. Installation Overview
Here are some steps you will perform in establishing your wireless network connection:
Peer to Peer Mode (Ad Hoc Mode): Apply your PC to connect to the internet as your server.
Start the installation process with this PC.
Infrastructure Mode: In the infrastructure mode, a gateway or an AP is applied to serve as a hub
to communicate (transmit/receive) data for PCs. In this mode, it is supposed to install a gateway or
an AP ahead of the installation process of 802.11b PC card.
Install the software: After finishing the installation process of the hardware and drivers, you are
ready to install the software by inserting the attached CD and performing the setup program.
Install the WIRELESS LAN 11Mbps adapter.
Install the network protocol(s) required to communicate on your network. Most likely you will
need the TCP/IP protocol.