User Manual

User’s Guide
13
11.
12.
The NetBEUI protocol is now installed. After clicking on OK return back to Network Component
Type box.
13.
Repeat the step 15 and 16 to add IPX/SPX protocol.
14.
Repeat the step 15 and 16 to add TCP/IP protocol.
15.
Click on the TCP/IP option for setting the IP address for your computer. You can select either
Obtain an IP address automatically or Use the following IP address setting. If you choose first
setup then enter the IP value, Subnet masking, DNS, Domain/ Workgroup name, and Gateway
Address values. After setting these parameters appropriately, click OK to return to Network
Component Type and you can select the File and Printer Sharing options as well as the Access to
your computer like other users connected to that ne twork by setting the computer sharing options.
Click on OK.