HGW F-240W-A User manual 2015.07 v1.0 Copyright © Gemtek Technology Co., Ltd. All Rights Reserved.
Outline Exterior Interface Accessory HGW LED definition Backup Statement Copyright © Gemtek Technology Co., Ltd. All Rights Reserved.
Exterior Copyright © Gemtek Technology Co., Ltd. All Rights Reserved.
Interface 4 USB port : USB 3.0 & 2.0 Reset G.fast/Vplus-VDLS2 interfaces Power LAN port Foreign eXchange Station Copyright © Gemtek Technology Co., Ltd. All Rights Reserved.
Accessory ONT * 1 RJ-11 Cable 1.8m * 1 RJ-11 Cable 1.5m * 1 RJ-45 Cable 1.5m * 1 Power Adapter * 1 Power Cable * 1 Pedestal *1 Copyright © Gemtek Technology Co., Ltd. All Rights Reserved.
HGW LED definition LED Color(S) Green Activity Description Solid Power on(self test succeeded) flash Device POSTING and BOOTING Off Power Off flash Off POST fails on startup (example, flash is corrupt). So in Hardware the LED should be RED by default until the software is running which can then turn it green. Normally the ONT should also do a self-test on power-up.
HGW LED definition LED Ethernet WAN or LAN(1~5) (TOP)) Color(S) Activity Description Green (10/100M) Solid Ethernet Link flash Data Transmitting / Receiving Amber (1000M) Solid Ethernet Link flash flash Data Transmitting / Receiving Provides a positive indication that at least one of the POTS lines, provisioned on the respective Service Unit, has a telephone in the off-hook condition. Call in or on talking Off Telephone at POTS ports are all on-hook.
HGW LED definition LED USB(1,2) (TOP) Color(S) Green Activity Description Solid A device is conneced to the USB port flash Traffic activity on the USB connection Off No device connected to the USB port. IP connected (the device has a WAN IP address from IPCP/DHCP/Static and Broadband link is up). If the PPPoE session is dropped due to an idle timeout, the light will remain green if the G.fast link is still present. If the session is dropped for any other reason, the light is turned off.
Backup Copyright © Gemtek Technology Co., Ltd. All Rights Reserved.
Federal Communication Commission Interference Statement 10 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Federal Communication Commission Interference Statement 11 IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
EU Declaration of Conformity In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. Česky [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a [Czech] dalšími příslušnými ustanoveními směrnice 1999/5/ES.
EU Declaration of Conformity 14 Italiano Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai [Italian] requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas [Latvian] tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
EU Declaration of Conformity Copyright © Gemtek Technology Co., Ltd. All Rights Reserved.