User Manual

11Mbps Wireless LAN Mini-PCI Card
Page 30 11Mbps Wireless LAN Mini-PCI Card User's Manual
For the Card under Windows 2000:
Please check the followings if you encounter some problem while installing the Mini-PCI card or your
Mini-PCI card is non-functional.
1. Check the Windows 2000 Diagnostics. You should find out whether there is any conflict
in the resource allocation or the I/O address, IRQ allocations. If you find that the IRQ or
I/O addresses are already assigned to some other devices, you must change that value.
I/O address needs 40h byte length.
2. Click on the Control panel. Double click on the Mini-PCI Card, you will see 11Mbps
Wireless LAN Mini-PCI Card Card . Double clicking on that will show you the Card
Information, driver name and the driver file. You must confirm the name of the driver and
the driver file as "cw10" and "cw10.sys". If you do not find the names as we listed before,
there are some problems and the driver is not installed properly. Reinstall the driver.
Note: Check the PnP BIOS setup menu and select no in case of the 11Mbps Wireless LAN
Mini-PCI Card Card installation.