User Manual

ManualsBrandsGemtek Technology ManualsComputers & AccessoriesWireless 802.11g mini-PCI Card

WMIB-114G Wireless 802.11g miniPCI

Network Card User Manual

Features and Functions

IEEE 802.11g 54-Mbps standard compliant and Wi-Fi CERTIFIED™ to ensure

complete compatibility with 802.11b solutions and Interoperability with over 800

products tested by the Wi-Fi alliance.

Low-power consumption with a comprehensive power management technique.

Optimized for new, low-power mobile processors, the BCM94306M consumes up

to 75 percent less power than competing technologies for extended notebook

battery life.

Maximum performance speed, reach, and security with unique Broadcom®

features such as SmartRadio™ and Xpress™ technology. Maximizes

performance in presence of BlueTooth™ and other 2.4 GHz devices.

Advanced high performance baseband processor with integrated medium

access controller (MAC) that supports future IEEE standards, such as 802.11i

Security and 802.11e QoS for built-in future proof designs.

SmartRadio technology improves wireless LAN througWMIB-114Gut and range

with advanced signal processing techniques. The all-CMOS solutions are capable

of self-calibrating based on usage temperature and other environmental

conditions, reconfiguring constantly for optimum performance.

OneDriver™ works with all AirForce™ 802.11a/b/54g™ solutions, simplifying

the upgrade/update process for customers and end users. Driver certification and

extensive operating system support, including WHQL certified Microsoft®

Windows® drivers, Zero configuration with Microsoft XP, and embedded drivers

for Linux® and VxWorks®.

Comprehensive security portfolio including Cisco Compatible Extensions (CCX),

Wi-Fi Protected Access (WPA) CERTIFIED, built-in hardware support for

Advanced Encryption Standard (AES) protocol, Wired Equivalent Privacy (WEP)

weak key avoidance, TKIP, and 802.1x.

Xpress technology standards-based software enhancement. Increases

aggregate network performance by up to 75 percent in a mixed 802.11g+802.11b

environment. 54g™-based client devices with Xpress technology can achieve

more than six times greater performance than 802.11b products.

Product Specifications

Chipset

Baseband/MAC – BCM4306KFB,C0

RF Transeiver – BCM2050KML

Host interface

32-bit mini PCI.

Network standard

Summary of content (4 pages)

PAGE 1
WMIB-114G Wireless 802.11g miniPCI Network Card User Manual Features and Functions IEEE 802.11g 54-Mbps standard compliant and Wi-Fi CERTIFIED™ to ensure complete compatibility with 802.11b solutions and Interoperability with over 800 products tested by the Wi-Fi alliance. Low-power consumption with a comprehensive power management technique. Optimized for new, low-power mobile processors, the BCM94306M consumes up to 75 percent less power than competing technologies for extended notebook battery life.
PAGE 2
IEEE 802.11b and 802.11g standard. Data rate 802.11b: 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps. 802.11g: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and 6 Mbps. Modulation 802.11g: OFDM. 802.11b: CCK (11 Mbps, 5.5 Mbps), DQPSK (2 Mbps), and DBPSK (1 Mbps). Network architectures Infrastructure and ad hoc. Operating frequencies 2.412–2.484 GHz. Operating channels 802.11g and 802.11b: 11 for North America, 13 for Europe (ETSI), 14 for Japan RF output power 13.5 dBm typical at 54Mbps 17.
PAGE 3
Microsoft WHQL certified for Windows XP, 2000. FAA Switch Manual radio on/off disables transmit and receive to comply with aviation in-flight restrictions. Temperatures Operates from 0 to 70°C, and storage from -40 to 90° C. Humidity (non-condensing) 5 to 95% Appendix A: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 4
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.