User's Manual

po channel
Quick Installation Guide
Warning
do not to spill water
A computer or laptop
that had internet access.
A valid gmail accountLocal network (wireless) with internet access
(will require access rights if protected) or an
Android phone (Android 2.3.5 or later)
with internet access.
A display (TV or monitor) with
HDMI input connection.
Upon opening your newly purchased UtubeBox,
please confirm that you have received the following contents!
Connect HDMI cable to UtubeBox HDMI connector and display’s
HDMI input connector.
1
1
3
2
Connect the power adaptor provided to UtubeBox and to
a household wall power.
2
A language selection prompt will show. Select your preferred language.
3
Detected WiFi signals will appear. Select the WiFi signal you want to
connect to, enter password.
4
An installation download message should appear and if not, please go
back to previous step and try to connect to the internet again (make sure
the username / password are correct).
5
When the installation download is complete (download time may vary
according to your internet environment), it will display a set of
“Pin Number” on the screen. Jog down this number for
registration purposes.
6
Pochannel box
remote
control
HDMI cable
Power
Adaptor
Quick
installation guide
do not place it under
direct sun / extreme heat
Gmail
HDMI cable /
AV terminal cable
power
12V 2A
( User Provided )
Prerequisites
P 1
Installation
Package Content
QIG
4
5
6
1 2 3 4