User's Manual

Basic WX-2211 Configuration & Main Page

The WX-2211 provides a Web Configuration interface that can be

accessed using standard web browsers such as Netscape Communicator or

Microsoft Internet Explorer. Since the interface is web based (HTTP), the

WX-2211 can be configured with any java and HTML compliant Internet

browser in any operating system. This section will discuss the Web

Configuration interface and how to use different options and settings.

Although you can change the IP address of the WX-2211 to meet your

needs, this manual will assume that the defaults are left in place. This means

that the IP address of your WX-2211 will be 192.168.0.1. If you have

changed the IP address scheme, please substitute 192.168.0.1 with the IP

address scheme that you have chosen.

Start-up and Log in

In order to configure the WX-2211, you must use your web browser

and manually input 192.168.0.1 into the Address box and press Enter. The

Main Page will appear. The Device Information and Device Status screens

can be seen without logging into the WX-2211. However, when the Setup

Wizard, Basic Setup, Advanced Settings and System Tools buttons are

pressed, the log in screen will be shown.