User Manual

WX-5525R Dual Band AP Router
Wireless Broadband Anywhere
16
Log : The default setting is Disable.
The Router can keep logs of all incoming or outgoing traffic for your Internet connection. This
feature is disabled by default. To keep activity logs, select Enable.
To keep a permanent record of activity logs as a file on your PC's hard drive, Logviewer software
must be used. This software is downloadable from the website, www.nobrand.com. In the Send Log
to field, enter the fixed IP address of the PC running the Logviewer software. The Router will send
updated logs to that PC.
To see a temporary log of the Router's most recent incoming traffic, click the Incoming Access Log
button. To see a temporary log of the Router's most recent outgoing traffic, click the Outgoing
Access Log button.
DHCP
The DHCP screen allows you to configure the settings for the Router's Dynamic Host
Configuration Protocol (DHCP) server function. The Router can be used as a DHCP server
for your network. A DHCP server automatically assigns an IP address to each computer on
your network. If you choose to enable the Router's DHCP server option, you must
configure your entire network PCs to connect to a DHCP server, the Router.