User Manual Part 1

Wireless Nd1 Router User Guide
3. Print a test page to ensure that the printer is working properly.
4. Power off your printer.
Step Two: Get Your Print Server Information
1. Disconnect the printer from your computer and Plug the thin rectangular end of the USB cable into
the USB port on the router.
5. Connect the power supply to your printer and turn your printer on.
6. Start a Web browser. In the location or address line type
192.168.2.1 and press ENTER.
Note: If you have modified your router's IP address, enter the new IP address
instead of 192.168.2.1.
4. When the user name and password window appears, type in the user name and the password you
created. Click OK to load the router's
Status page.
Note: You are not prompted to log in the first time you connect to the router
configuration pages. During the Setup Wizard procedure, you created a user name
and password to log on to the router. You will need to use these whenever you log
on to the router. The user name and password are case-sensitive.
file:///G|/CSO/Documentation/Documentation%20-%20Draft...ach-1%20Router/User%20Guide/English/linux_printer.html (2 of 8)9/14/2006 2:44:22 PM