User Manual Part 1

Wireless Nd1 Router User Guide

❍ If you already have a Network Name (SSID) and WPA2 and WPA (PSK)

wireless security, with TKIP and AES encryption, and a pass phrase set on

the router, SecureEasySetup will not change any of these settings.

❍ If you have another wireless security method or encryption type set up on

your router, SecureEasySetup will detect Network Name (SSID) already

used on the router, then reset your method and encryption to WPA2 and

WPA (PSK) wireless security, with TKIP and AES encryption, and

generate a pass phrase.

2. SecureEasySetup will negotiate with an installed Nd

or other certified

SecureEasySetup wireless device in range that is in SecureEasySetup mode to

pass the wireless security settings to the device.

Pressing the SecureEasySetup button on your router for 7 seconds will reset your

wireless security settings to the factory default, None (no security enabled).

Connect a New Wireless Client Using SecureEasySetup

1. Press the SecureEasySetup button on your router for 1 second. The

SecureEasySetup LED will blink, indicating that it is ready to connect a

SecureEasySetup device.

2. Press the SecureEasySetup button in the utility for your wireless adapter.

Your wireless adapter utility will display a message when the connection

has been successfully completed.

The SecureEasySetup LED on your router will stop blinking when the

SecureEasySetup process has completed on the router.

file:///G|/CSO/Documentation/Documentation%20-%20Draf...0Mach-1%20Router/User%20Guide/English/config_ses.html (2 of 4)9/14/2006 2:44:23 PM