User Manual Part 2

Wireless Nd1 Router User Guide
MAC Filter
In this area you can control which wireless devices are allowed or denied access to the
router based upon their MAC addresses. The MAC address can usually be found either on a
label on the external wireless product or in the configuration utility of the wireless client,
depending on the wireless device you are using.
The router configuration pages let you configure access to the router based on MAC
addresses by using the Allow Current Clients button or specify a level of filter to apply:
● Click Allow Current Clients to allow all of the wireless clients currently connected to
the router to be allowed access to the router in the future. By default, the filter setting
of Allow only these devices will then be applied.
● Allow all devices: Any wireless client that has the correct security information will be
allowed to connect to the router. This is the default setting.
● Allow only these devices: Allows only devices with specific MAC addresses to
establish a wireless connection with the router.
1. Enter the MAC address of the device that should be allowed connection to the
file:///G|/CSO/Documentation/Documentation%20-%20Draf...%20Mach-1%20Router/User%20Guide/English/security.html (5 of 6)9/14/2006 2:44:29 PM