User Manual Part 2

Wireless Nd1 Router User Guide
To add entries for this feature, complete the following steps:
1. Specify the Outbound protocol (TCP/UDP).
2. Specify the Outbound port range of the destination ports for outbound traffic which
will cause this Port Trigger to activate.
3. Specify the Inbound protocol (TCP/UDP).
4. Specify the Inbound port range of the destination ports for inbound traffic. The
router will allow inbound traffic on these ports when the Port Trigger is active.
5. Specify the Destination port range for the ports the inbound connection will be
translated to. When this Port Trigger is active, the router will translate the destination
file:///G|/CSO/Documentation/Documentation%20-%20Draf...%20Mach-1%20Router/User%20Guide/English/firewall.html (4 of 8)9/14/2006 2:44:30 PM