User Manual Part 2

Wireless Nd1 Router User Guide

wireless connections.

If you enable Bridge mode and

WDS Restrictions in the wireless router, a bridge will be

created to another wireless router or access point and no wireless clients will be able to

connect to the wireless network. This is generally used when you want to connect two

networks that are in different buildings. Each wireless router or access point will have to

have the MAC address of the other device entered in the WDS Restrictions table.

With Bridge mode, you will only be able to use the following forms of encryption methods:

WPA (PSK), WEP open, WEP shared, or None. For your encryption type, you can choose

either TKIP or AES, but not TKIP and AES.

Note: In Bridge mode, the Wireless Nd

Router does not support Wi-Fi Multimedia

(WMM).

Note: Click Save to apply all your new settings and reboot the router after you have

completed all your changes.

WDS Restrictions

file:///G|/CSO/Documentation/Documentation%20-%20Dra...20Mach-1%20Router/User%20Guide/English/wireless.html (4 of 13)9/14/2006 2:44:31 PM