User Manual Part 2

Wireless Nd1 Router User Guide
Static Routes
If you connect the router to an existing network as the primary gateway to the Internet, or
connect another router to this router, you may need to establish Static Routes. This will
allow the clients that are not directly connected to the router to access the network
resources of the router's LAN.
Note: The default LAN IP address of the router is 192.168.2.1 and
default Subnet Mask is 255.255.255.0.
1. Enter the IP address of the destination network/host in the IP address field.
2. Enter the Subnet mask for the destination host or network in the Subnet mask
field. If you are adding a static route for a single host, this should be
255.255.255.255.
3. Enter the Gateway the router will use to send traffic to the destination network/
host in the Gateway field.
4. Enter the number of routers that this router must connect through in order to
file:///G|/CSO/Documentation/Documentation%20-%20Dra...5464%20Mach-1%20Router/User%20Guide/English/lan.html (4 of 5)9/14/2006 2:44:32 PM