User Manual Part 2

Wireless Nd1 Router User Guide
Press Renew.
Close the application.
2. Your computer should acquire an IP address (such as 192.168.2.5) from the router.
3. Try again to access the router configuration pages at
192.168.2.1.
4. If the router configuration pages appear and you still cannot connect to the Internet, the
problem may be with its connection to your cable/DSL modem.
Verify your router's
connection to the Cable or DSL modem.
5. If the router configuration pages still do not appear, you need to restart your router.
A. With a thin tool, such as a paper clip, briefly press the Reset button on the back of
the router for 1 second.
Note: If you press the Reset button for more than five seconds, the
router will return to its factory default settings.
B. Wait about 30 seconds for the LEDs on the router to stabilize.
C.
Release and renew your computer's network connection information again.
D. Try again to access the router's Web address at
192.168.2.1
E. If the router configuration pages appear and you still cannot connect to the Internet,
the problem may be with its connection to your cable/DSL modem.
Verify your
router's connection to the Cable or DSL modem.
6. If you still cannot access the router, the router may need to be restored to the default
factory settings.
Note: When you restore to the factory default settings, you will lose all of
your router's custom settings and will need to set it up again as if you were
file:///G|/CSO/Documentation/Documentation%20-%20Draf...%20Mach-1%20Router/User%20Guide/English/trouble2.html (5 of 8)9/14/2006 2:44:36 PM