User Manual Part 2

Wireless Nd1 Router User Guide
5. Remote Access allows any host on the entire WAN network to connect to the router's configuration
pages. By default, only devices that are connected to the router via an Ethernet cable at a LAN
port can access the router's configuration pages. To enable Remote Access, select Allow access
to this router from the Internet. By default, the port "8080" is assigned. If you wish to use
another port, enter the port number.
6. To enable remote access to the printer attached to the router from outside the LAN, select Allow
access to the print server from the Internet.
Note: You need to click Save to save all your new settings and reboot the router after you have
completed all your changes.
Static Routes
file:///G|/CSO/Documentation/Documentation%20-%20Draf...%20Mach-1%20Router/User%20Guide/English/internet.html (3 of 6)9/14/2006 2:44:27 PM