User Manual Part 3

Wireless Nd1 Router User Guide
10. Type the following command but DO NOT PRESS ENTER: tftp -i 192.168.2.1
put 5464.usr
11. Unplug the power supply of the Wireless Nd
1
Router.
12. Plug the power supply of the router back in.
13. Immediately press ENTER in the dialog box on your computer to execute the
command.
14. You should now see a message stating the image was transferred. Wait for the
upgrade to finish. When the Wireless LED turns on, the upgrade is complete.
You must now set IP addressing for the NIC back to "Obtain an IP address
automatically."
1. Go to Windows Start > Control Panel > Network Connections.
2. Right-click the Local Area Connection of the NIC that connects the computer to
the router and select Properties.
3. On the General tab of Local Area Connection Properties, select Internet
Protocol (TCP/IP) and click Properties.
4. Select Obtain an IP Address Automatically and click OK, then click OK again.
Windows Me, 98, and 95 users:
file:///G|/CSO/Documentation/Documentation%20-%20Draf...%20Mach-1%20Router/User%20Guide/English/trouble7.html (4 of 7)9/14/2006 2:44:39 PM