User Manual Part 3

Wireless Nd1 Router User Guide
Wireless Nd1 Router User Guide
● Home
● Installation
● Configuration
● Tutorials
● Help
My wireless adapter cannot connect to the router.
Solution:
Be certain that you have each Wireless PC Card, PCI Adapter, or USB Adapter set to
Infrastructure mode. Verify that you are using the same SSID, Channel, and Security
information as the Wireless Nd
1
Router. Refer to your Wireless PC Card's, PCI
Adapter's, or USB Adapter's documentation to determine how to change these settings.
Solution:
The wireless security settings of any wireless PC cards, PCI adapters, or USB adapters
must match the settings for the Wireless Nd
1
Router.
1. In the configuration utility for your wireless card or adapter, ensure that you are
connecting to the correct Wireless Nd
1
Router by verifying the MAC address,
Network name (SSID), and
wireless security settings. The MAC address is located
on the label on the bottom of the Wireless Nd
1
Router.
2. Ensure that the correct Pass phrase or key and encryption option are being used.
If you changed the settings in the configuration of the Wireless Nd
1
Router, you
must also change the settings of every Wireless PC Card, PCI Adapter, or USB
Adapter connecting to this network.
file:///G|/CSO/Documentation/Documentation%20-%20Draf...%20Mach-1%20Router/User%20Guide/English/trouble9.html (1 of 2)9/14/2006 2:44:40 PM