User Manual Part 3

Wireless Nd1 Router User Guide

● Home

● Installation

● Configuration

● Tutorials

● Help

Troubleshooting Ping Procedure

If at any time during the ping procedure you do not receive a return message for a successful ping, this means

that the address you are pinging has been changed and is causing a conflict or is no longer available. Check the

address in the configuration pages and make any necessary corrections using the console mode. After you have

made the corrections, continue with the ping procedure.

Note: Linux users can perform steps 3 through 7 after opening a terminal.

1. Click Windows Start > Run.

2. In the Run dialog box:

❍ Windows XP, 2000, and NT users: Type cmd and click OK.

❍ Windows Me, 98, and 95 users: Type command and click OK.

3. Do one of the following:

❍ Windows XP, 2000 and NT users: Type ipconfig /all and press ENTER.

❍ Windows Me, 98, and 95 users: Type winipconfig /all and press ENTER.

This displays IP configuration, including values like the following:

IP Address: 192.168.2.2

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.2.1 (This is the Default Gateway of your LAN)

DNS Server: 192.168.2.1

file:///G|/CSO/Documentation/Documentation%20-%20Draf...20Mach-1%20Router/User%20Guide/English/trouble17.html (1 of 3)9/14/2006 2:44:43 PM