User Manual
Table Of Contents
- Table of Contents
- Setting Up Your PC
- Putting Your PC Together
- Turning On Your PC for the First Time
- Setting Up and Connecting to the Internet
- Configuring and Registering Norton Internet Security Software
- Using the PC with Safety and Comfort
- Signing Up for Software Updates
- Setting Up Accounts on Your New PC
- Guidelines for Installing Software and Hardware Devices
- Using HP Products
- Transferring Files and Settings from Your Old PC to Your New PC
- Using HP Organize Software
- Using the Keyboard
- Using Your PC Top
- Configuring Speaker and Sound Options
- Sound Connector Types
- Speaker Configurations
- Connecting the PC to a Home Audio System
- Connecting Digital Audio
- Configuring Audio Output
- Configuring Audio Output with Multi- channel Sound Manager
- Configuring Audio Output with Sound Effect Manager
- Configuring Audio Output with Realtek HD Sound Effect Manager
- Configuring Multi-streaming Audio
- Configuring Audio for WinDVD Player
- Using Headphones
- Resolving Sound Issues
- Using the Memory Card Reader
- Using the HP Personal Media Drive
- Working with Digital Images
- Playing CDs and DVDs
- Creating Audio and Data Discs
- Erasing Rewritable Discs Before Recording
- Working with Audio CDs
- Working with Data DVDs and CDs
- Copying a DVD or CD
- Archiving Files on a CD or DVD
- Working with Image Files
- Disc Labeling with LightScribe
- Compatibility Information
- Disc Features and Compatibility Table
- Optical Drive Quick Reference Table
- Software Quick Reference Table
- Creating Video Discs and Movies
- Creating Movies Using muvee autoProducer
- Getting Help
- Index
- test.pdf
- Table of Contents
- Table of Figures
- 1. Introduction
- 1.1 Inventory Checklist
- 1.2 Supported Security
- 2. Antenna Attachment
- 1. Please find a connector at one end of the antenna cable. Screw this connector (A) to the matching antenna receptable (B) located at the back of the computer chassis.
- 2. Place the antenna in an elevated and open area for optimal wireless performance.
- 3. You can optionally use the 'attachment pad' which comes with the accessory kit to make your antenna base stick to any flat surface. Avoid using the front panel of your computer to stick the antenna
- 3. Security Setting
- 4. WindowsXPWireless Zero Configuration
- 4.1. Launching MicrosoftWindowsXP Wireless Network Configuration
- 4.2. Setting the Network Key Automatically
- 1. Find the Network Key (WEP Key or WPA Key) for your Wireless Network.
- 2. Select View Available Wireless Networks from the Wireless Network icon menu.
- 3. Select the Wireless Network of your choice by clicking on its name and the entire block will become highlighted.
- 4. Select Connect in the lower right corner.
- 5. Enter your Network Key (WEP Key or WPA Key) for your Wireless Network.
- 6. Input the Network Key a second time into the “Confirm network key” field.
- 7. Select Connect.
- 4.3. Setting the Network Key Manually
- 1. Choose your Wireless Network in the Available Wireless Networks selection box.
- 2. Select Change advanced settings found on the left side of the dialog box.
- 3. Select the General tab in the Wireless Network Connection Properties dialog box.
- 4. Highlight Internet Protocol (TCP/IP) in the “This connection uses the following items:” selection box.
- 5. Select Properties.
- 6. Verify that the following choices are selected:
- 7. Select OK.
- 4.3.1 WEP: Setting the Network Key (Network Security)
- 1. Open the Wireless Network Connection Properties dialog box:
- 2. Select Add under the Preferred networks selection box.
- 3. Input your Network name (SSID).
- 4. Uncheck the box “The key is provided for me automatically”.
- 5. Verify that the Network Authentication is set to Open.
- 6. Verify that the Data Encryption is set to WEP.
- 7. Input the Network Key of your Access Point, Wireless Broadband Router or Wireless Gateway.
- 8. Input the Network Key a second time into the "Confirm network key" box.
- 9. Select OK.
- 4.3.2 WPA: Setting the Network Key (Network Security)
- 1. Open the Wireless Network Connection Properties dialog box:
- 2. Select Add under the Preferred networks selection box.
- 3. Uncheck the box “The key is provided for me automatically”.
- 4. Verify that the Network Authentication is set to WPA-PSK.
- 5. Verify that the Data Encryption is set to TKIP or AES.
- 6. Input the Network Key of your Access Point, Wireless Broadband Router or Wireless Gateway.
- 7. Input the Network Key a second time into the “Confirm network key” box.
- 8. Select OK.
- Glossary
- Appendix A: Troubleshooting
- Appendix B: Regulatory Notices
- Appendix C: Product Specifications
- Index
Configuring Speaker and Sound Options 35
5 Connect the stereo mini-jack of a Y adapter cable into the microphone (pink)
connector or the center speaker/subwoofer (gold) connector that matches the
back of your PC.
• Connect the left and right ends of the Y adapter cable into the center/
subwoofer inputs on the back of the receiver/amplifier (5.1 or higher
channel system).
• Plug the Y adapter cable into the subwoofer connector on the back of the
receiver even if a subwoofer is not used.
6 Turn on the receiver/amplifier.
7 Select the receiver/amplifier input that the Y adapter cables are plugged into.
8 Turn on the PC.
9 After the audio system is connected to the PC, configure the audio software for
sound output for your PC model:
• Type 3 connectors: See “Configuring Audio Output with Multi-channel
Sound Manager” on page 37.
• Type 6 connectors: See “Configuring Audio Output with Sound Effect
Manager” on page 38.
Connecting Digital Audio
(Select models only)
If you have a sound card and you are connecting your home stereo
AV receiver via Digital Out, plug the 3.5-mm stereo plug into the Digital
Out connector on the sound card. Connect the red RCA stereo plug in
the 3.5-mm Y cable to the AV receiver’s digital input connector. If the red
RCA stereo plug does not work, try the white stereo plug. One of the
connectors is not used.
To connect digital audio, your PC must include a digital out connector on
the sound card or on the back panel. You do not need to connect
multichannel speaker outputs if you connect the digital output.
NOTE: Always turn on the PC before you turn on the speaker system.
3
6
S