User Manual
,VVXH 0D\
5. Do not place the CPE on an unstable stand or table; the CPE may drop and become
damaged.
6. For an Internet access, a PC with a 10/100 Mb/s Ethernet adapter card installed is
required. The PC must be configured for TCP/IP.
%HIRUH\RXEHJLQ
Make sure that the package content is complete. Preserve original carton and packaging
material.
0RXQWLQJSURFHGXUH
There are three ways for mounting the CPE:
•
Wall mounting
1. Locate a high position on the wall that is free of obstructions.
2. Connect two screws in the wall 5 cm (2 in.) apart. Do not screw the screws all the
way into the wall.
,PSRUWDQW
Make sure that the screws are securely fixed to the wall and strong
enough to hold the weight of the CPE.
3. Align the holes on the back of the CPE with the screws on the wall.
4. Hang up the CPE on the screw.
•
Desktop mounting
Place the CPE on top of the desk with the name “Alcatel.Lucent” side up.
•
Stand-up mounting
Place the cradle at the bottom of the CPE and sit the CPE on top of the desk.
+:LQVWDOODWLRQSURFHGXUH
&$87,21
Please follow the directions from your service provider regarding the connection of your
VDSL2 modem. The following procedure are meant as a guideline.
Connect the cord of the AC power adapter to the power socket on the CPE which is
labeled 15 V 1 A. Then plug the power adapter directly into the AC power outlet.
5HVXOW
The LED marked PWR (power) on the LED panel is on.
Restore this CPE to factory defaults if necessary. See section Reset and restore the
default settings to restore the CPE to the factory defaults.