User Manual
,VVXH 0D\
Please enter your settings into the fields provided.
Enter the IP Address and the Subnet Mask of the host that sends the traffic in the
6RXUFH
,3
field and
6XEQHW0DVN
field.
Enter the port number of the sending host in the
6WDUW3RUW
and
(QG3RUW
field.
Enter the IP Address and the Subnet Mask of the host that receives the traffic in the
'HVWLQDWLRQ,3
field
6XEQHW0DVN
field.
Enter the port number of the destined host in the
6WDUW3RUW
and
(QG3RUW
field.
Select the appropriate protocol e.g. TCP.
In the
4R60DSSLQJE\
field choose the
2ULJLQDO7RV7DJ
if you want to assign queue
according to the incoming
7R 6
(Type of Service) value. Then choose the
6SHFLILHG4XHXH
and assign a queue number for the incoming traffic (0...7). For
7R 6
and
'6&3
(DiffServ
Code Point) value, you can select
.HHS2ULJLQDO7RV
to keep the original value or you can
assign a new
7R 6
(0...7) value and a new
'6&3
(0...63) value for this type of traffic.
In the
6HW&R6
field configure
&R6
(Class of Service).
If you enable
6HW&R6
select the
7R 6
radio button or enter the appropriate value in the
8VHU6SHFLI\
field (0...7).
Click
$GG
at the bottom of the page to save your changes.
(
1'
2
)
6
7(36