Gemtek 4G Wi-Fi Spot User Manual
Gemtek 4G Wi-Fi Spot Copyright This DOCUMENT is copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Gemtek Technology Co. Ltd. Notice Gemtek reserves the right to change specifications without prior notice.
Gemtek 4G Wi-Fi Spot Contents Copyright.......................................................................................................................................................................................................... 1 Notice ............................................................................................................................................................................................................... 1 Contents .........................................
Gemtek 4G Wi-Fi Spot How to Setup Wireless Security...................................................................................................................................................................... 21 Chapter 3 – Reference Manual .......................................................................................................................................................................... 22 Personalize............................................................................
Gemtek 4G Wi-Fi Spot Wi-Fi Settings | Advanced ........................................................................................................................................................................... 38 Wi-Fi Settings | WPS................................................................................................................................................................................... 42 Local Address.........................................................................
Gemtek 4G Wi-Fi Spot Control Panel | LCD Management............................................................................................................................................................... 53 Control Panel | System Buzzer.................................................................................................................................................................... 54 Control Panel | About ..............................................................................
Gemtek 4G Wi-Fi Spot About this Manual Purpose This document provides information and procedures on installation and configuration of WiMAX/Wi-Fi Portable Router. You could utilize the theoretical information in this guide to setup your device. Conventions Used in this Document The following typographic conventions and symbols are used throughout this document: Very important information. Failure to observe this may result in damage. Important information that should be observed.
Gemtek 4G Wi-Fi Spot bold Menu commands, buttons and input fields are displayed in bold Chapter 1 – Introduction Product Overview Thank you for choosing WiMAX/Wi-Fi Portable Router. Compliant with 802.16-2005 WiMAX standard, WiMAX/Wi-Fi Portable Router is a comprehensive device which can connects to WiMAX network and also provides Wi-Fi connectivity for multiple users.
Gemtek 4G Wi-Fi Spot If any of the items mentioned above are missing or damaged, please contact our customer support immediately.
Gemtek 4G Wi-Fi Spot 1. Power Button: Press and hold the Power button for 3 seconds to power on or power off the device. 2. View Status: Shortly press the Power button to view the device status. (Including WiMAX Status, Wi-Fi connection Status and System Status) 3. WPS Button: Press WPS button to establish wireless connection without setup the device. Step1: Press the WPS button on Zoom, and the WPS LED indicator will start flashing.
Gemtek 4G Wi-Fi Spot 5. Reboot/Reset Button: Press and hold the Reboot/Reset button for less than 5 seconds to reboot the device. Or press and hold the Reboot/Reset button for more than 5 seconds to reset the device to factory default. 6. USB Port: This port is to connect your device with a PC or charge the built-in battery.
Gemtek 4G Wi-Fi Spot LCD Display Display the WiMAX Signal Strength when the device is connected with WiMAX service. WiMAX Status, you can view the device WiMAX connection status by shortly press the power button once. This icon appears when the system buzzer sound is enabled. Battery charging, this icon appears when the device is connected with PC by using USB cable. Display the battery status.
Gemtek 4G Wi-Fi Spot This icon appears when the device is connected with PC through USB cable. Display the Wi-Fi connectivity which you can know that how many users are currently connected with your device through Wi-Fi connection. (A device only allows eight Wi-Fi connections) Display the system time when the device is connected with WiMAX service.
Gemtek 4G Wi-Fi Spot System Startup WiMAX Status Wi-Fi Connection Status System Status Hibernate Mode Standby Mode Low Battery Reset Default Reboot Power Down 13
Gemtek 4G Wi-Fi Spot Chapter 2 – Installation Installation Install through USB Cable & Connect to Service Please follow the steps below to install the device: Step1: Connect the device to your PC with a USB cable provided. Step2: Windows will automatically install the device driver after you plug in the USB cable.
Gemtek 4G Wi-Fi Spot Step3: Launching the Windows Network Connections window by right click on My Network Places and select Properties. The driver has been installed successfully if there is a new Local Area Connection with Device Name, MediaTak WiMAX RNDIS-based device, is appeared.
Gemtek 4G Wi-Fi Spot Step4: Now you can start browsing the Internet or configure your device by opening the web browser and entering the default IP address of the device: http://192.168.15.1/ (The default password is “admin”.
Gemtek 4G Wi-Fi Spot Connect to service with WiWi-Fi Step1: You could connect to the service without installation through Wi-Fi connection.
Gemtek 4G Wi-Fi Spot Step2: Launching the Windows Wireless Network Connection, search for the device name (SSID) from the network list and connect to the device. The default SSID is “GemtekHotspot”.
Gemtek 4G Wi-Fi Spot Step3: Select Wireless Network Connection Status from the Windows task bar. The Status would show “Connected” once the Wi-Fi connection is established.
Gemtek 4G Wi-Fi Spot Step4: Now you can start browsing the Internet or configure your device by opening the web browser and entering the default IP address of the device: http://192.168.1.1/ (The default password is “admin”.
Gemtek 4G Wi-Fi Spot How to Setup Setup Wireless Security The device equipped with WEP, WPA PSK, WPA2PSK and WPA-WPA2-Mixed PSK standards. To enable or change security settings, you could click Wi-Fi Setting > Basic tab on the web interface, and you would need to determine which standard and key you would like to use.
Gemtek 4G Wi-Fi Spot Chapter 3 – Reference Manual The main menu is located at the left side of the screen and each main menu item contains sub-items on the top right of the screen.
Gemtek 4G Wi-Fi Spot Please click Apply button every time the settings are changed.
Gemtek 4G Wi-Fi Spot Personalize Personalize | Password Select Personalize > Password to enable or disable the password protection for the device. You can also change the existing password on this sub-menu. Enable Login Password Protection: If this option is enabled, you have to enter the password every time you connect to the device. New Login Password: Enter a new password. (The new password can contain 64 bytes ASCII code and it is case sensitive.
Gemtek 4G Wi-Fi Spot Apply button: The changes that you have made to this window can be saved in the device by clicking the Apply button. Forgot your password? Press and hold the Reboot/Reset button for more than 5 seconds to reset the device to factory default. (please see “Connector and Buttons” section in CHAPTER 1 of this document to find the location of this button on the device) Factory default password? The factory default password is admin.
Gemtek 4G Wi-Fi Spot Personalize | Device Time Select Personalize > Device Time to set the time zone. Enable NTP: Check this option to enable NTP (Network Time Protocol) to ensure that all computers on the network use the same time. Current Local Time: Display current local time. Time Zone: Select the proper time zone for your location on the drop down menu. Auto Adjust for Daylight Saving Time: Please enable this option if your location observes Daylight Savings Time.
Gemtek 4G Wi-Fi Spot Personalize | Device Name Select Personalize > Device Name to define a specific name for your device, so that you can login to this device from any PC on your internal network by entering the device name on the address bar. The default, the device name is WiMaxCPE. Device Name: Display the current device name. New Device Name: Enter a new name for your device (Maximum 20 ASCII Printable Characters allowed).
Gemtek 4G Wi-Fi Spot Personalize | Restore To Factory Select Personalize > Restore To Factory to clear all users’ configuration and restore to factory default settings. Restore Factory Settings: Check this checkbox and click the Apply button to reset the device settings to factory default.
Gemtek 4G Wi-Fi Spot Internet Internet | WiMAX Security Select Internet > WiMAX Security to setup the security method. Authentication Method: Select the authentication protocol, EAP-TTLS-MACHAPV2, EAP-TLS or None. Please enter the username and password if you select EAP-TTLS-MACHAPV2. The username and password will not be required if you selected EAP-TLS, which is the default setting. No input is needed if you select NONE.
Gemtek 4G Wi-Fi Spot Apply button: The changes that you have made on this window can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot Internet | Internet Protocol Select Internet > Internet Protocol to configure the internet protocol. Connection Mode: Display the current connection mode of device with the WiMAX network. Host Name: Enter the host name provided by your service provider (optional). Undo: Click the Undo button to clear the changes that you have made on this window. Apply: The changes that you have made on this window can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot Internet | Firewall Select Internet > Firewall to configure the built-in firewall feature of the device. The firewall feature can be used to block unauthorized access while allowing only the authorized connections from the Internet. This feature also allows the device to be managed over the Internet by authorized personnel. Operation Mode: Display the operation mode of firewall. Enable Firewall: Click the checkbox to enable device firewall.
Gemtek 4G Wi-Fi Spot Enable ping from internet: The device will respond to a ping request from the internet if this option is enabled. Undo: Click the Undo button to clear the changes that you have made on this window. Apply: The changes that you have made on this window can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot Internet | Dynamic DNS Select Internet > Dynamic DNS to configure the DDNS settings. (The device only provides the listed DNS service providers.) User: Enter the username provided by your DNS service provider. Password: Enter the password provided by your DNS service provider. Host: Enter the host provided by your DNS service provider. Enable: Enable the DNS service provider by checking this checkbox. Undo: Click the Undo button to clear the changes that you have made on this window.
Gemtek 4G Wi-Fi Spot Apply: The changes that you have made on this window can be saved in the device by pressing the Apply button.
Gemtek 4G Wi-Fi Spot WiWi-Fi Settings Wi-Fi Settings | Basic Select Wi-Fi Settings > Basic to configure the basic Wi-Fi settings. Wireless Settings: Enable or disable the Wi-Fi interface by clicking on this checkbox. Network Name (SSID): Define the service set identifier that represents the “name” of your network. (the default SSID is ”GmetekHotspot”) SSID Suppress: Enable or disable suppression of SSID broadcasting. Authentication: Select the Wi-Fi security method.
Gemtek 4G Wi-Fi Spot Password: Enter the password for your Wi-Fi service, the default is “1234567890”. Undo: Click the Undo button to clear the changes that you have made on this window. Apply: The changes that you have made on this window can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot Wi-Fi Settings | Advanced Select Wi-Fi Settings > Advanced to configure the advanced Wi-Fi settings. Radio Channel: Select the appropriate channel for your Wi-Fi network. Working Mode: Select the wireless operation mode for your Wi-Fi network. (The selection contains 802.11b/g, 802.11b only and 802.11g only) RTS Threshold: Specify the packet size threshold of the device by changing the request-to-send (RTS) value.
Gemtek 4G Wi-Fi Spot DTIM Interval: Define the Delivery Traffic Indication Message Interval which specifies the data beacon rate between 1 and 255. CTS Protection Mode: Set Clear to send (CTS) protection mode to Auto to ensure that the computers on a network can connect to a wireless router when many communication devices are present. Preamble Length: Define the length of preamble, either short or long. Transmission Power: Select the Wi-Fi transmit power from the drop down menu.
Gemtek 4G Wi-Fi Spot Allow: To create a MAC filter list for allowing the specific clients to have access to the wireless network. Insert Button: Click Insert to add MAC address (up to 10) to the list. Del Button: Click Del to remove MAC address from the list. Deny: To create a MAC filter list for blocking the specific clients to have access to the wireless network. Insert Button: Click Insert to add MAC address (up to 10) to the list. Del Button: Click Del to remove MAC address from the list.
Gemtek 4G Wi-Fi Spot Undo: Click the Undo button to clear the changes that you have made on this window. Apply: The changes that you have made on this window can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot Wi-Fi Settings | WPS Select Wi-Fi Settings > WPS to configure the Wi-Fi Protected Setup. Enable WPS: Enable or disable the WPS by clicking on this checkbox. PBC Mode: Select this radio button and click on Start button to setup WPS on your device and then start WPS on the client which you would like to connect with your device within 2 minutes. PIN Mode: Select this radio button and enter Client PIN code which you would like to connect with your device to start WPS on the client.
Gemtek 4G Wi-Fi Spot Local Address Local Address | DHCP Server Select Local Address > DHCP Server to configure the internal DHCP server settings. This device has a built-in DHCP server that can be used for managing the allotment of IP address for the devices connected to the LAN Port of the device. Enable DHCP Server: Enable DHCP Server by clicking on the checkbox. DHCP Server IP address: Enter the DHCP server IP address.
Gemtek 4G Wi-Fi Spot Undo: Click the Undo button to clear the changes that you have made on this window. Apply: The changes that you have made on this window can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot Local Address | Lease Status Select Local Address > Lease Status to view the current status of client host PC such as host name, host PC’s MAC address, IP address, and remaining lease time Refresh: Click the Refresh button to display the updated information of the client host PC. Auto: Click the Auto button to refresh the information automatically.
Gemtek 4G Wi-Fi Spot Local Address | Lease Reservation Select Local Address > Lease Reservation to assign the specific IP addresses to the specific client device connected to the LAN port. Add button: Click the Add button to insert lease reservation information. Del button: Click the Del button to delete the selected lease reservation information. Before clicking Del, one or more information items must be selected by selecting the checkbox on the Select column of the table.
Gemtek 4G Wi-Fi Spot Port Forwarding Port Forwarding | Basic Select Port Forwarding > Basic to forward the network traffic to specific hosts based on the protocol and port number. It is used to play Internet games or provide local services (such as web hosting) for a LAN group. Enable UPnP IGD: When this option is enabled, certain Windows applications would setup the port forwarding rule dynamically. DMZ IP Address: The IP address of DMZ should be entered here.
Gemtek 4G Wi-Fi Spot Port Forwarding | Forwarding Select Port Forwarding > Forwarding to manage the additional port forwarding rules. Add: Click the Add button to insert new port forwarding rule. When adding a new port forwarding rule, please select TCP or UDP, and then enter port and IP information such as WAN port range, LAN IP address, and LAN port range. Del: Click the Del button to delete the selected port forwarding rule.
Gemtek 4G Wi-Fi Spot Control Panel Control Panel | Software Select Control Panel > Software to manage the software of your device. Click Browse to select the IPKG file, and then click Upgrade to install the selected IPKG. Or click the Remove button to delete the IPKG file.
Gemtek 4G Wi-Fi Spot Control Panel | Certificate Select Control Panel > Certificate to modify the device certificates. Click Browse to select the certificate file, and then click Upgrade to install the selected certificate.
Gemtek 4G Wi-Fi Spot Control Panel | System Select Control Panel > System to define the system Auto refresh interval in second. Undo: Click the Undo button to clear the changes that you have made on this window. Apply: The changes that you have made on this window can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot Control Panel | Power Management Select Control Panel > Power Management to help you manage your device battery power. Power Save Enable: Enable this option to help conserve power when using your device’s built-in battery. Power Standby time: Enter the number of seconds that your device will go into standby mode. Power Hibernate time: Enter the number of seconds that your device will go into hibernate. Undo: Click the Undo button to clear the changes that you have made on this window.
Gemtek 4G Wi-Fi Spot Control Panel | LCD Management Select Control Panel > LCD Management to help you manage your device LCD display. LCD Backlight Timeout: Select Never radio button to keep the LCD backlight always on, or select the second radio button to set the backlight timeout period in seconds. System Time Display Format: Select the system time display format from the drop down menu, 12hr or 24hr.
Gemtek 4G Wi-Fi Spot Control Panel | System Buzzer Select Control Panel > System Buzzer to enable or disable (Mute) the buzzer sound during the system startup and shutdown. Undo: Click the Undo button to clear the changes that you have made on this window. Apply: The changes that you have made on this window can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot Control Panel | About Select Control Panel > About to display the basic information about the device: Service Provider, Product Name, WAN port MAC address, LAN Port MAC address, Model ID, Device hardware version and Serial ID.
Gemtek 4G Wi-Fi Spot Status Status| WiMAX Status Select Status > WiMAX Status to display the WiMAX connection status. Refresh: Click the Refresh button to refresh the current WiMAX connection status. Auto: Click the Auto button to update the status information periodically.
Gemtek 4G Wi-Fi Spot Status| Device Status Select Status > Device Status to display the status of device system uptime and WAN information. Refresh: Click the Refresh button to update the current device status. Auto: Click the Auto button to update the status information periodically.
Gemtek 4G Wi-Fi Spot Reboot /Log /Log out/ Reconnect There are 3 function buttons on the lower left corner Reboot: Click the Reboot button to restart your device. Log out: To logout from this management UI and go back to log in page when you click the Log out button. Reconnect: The device will attempt reconnection to the Base Station if you click the Reconnect button.
Gemtek 4G Wi-Fi Spot Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Gemtek 4G Wi-Fi Spot intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: The country code selection is for non-US model only and is not available to all US model.
Gemtek 4G Wi-Fi Spot Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: - EN 60950-1: 2006+A11: 2009 Safety of Information Technology Equipment - EN 300 328 V1.7.
Gemtek 4G Wi-Fi Spot Directive for Digital Multipoint Radio Equipment EN 302 326-3 V1.3.1: 2008 Fixed Radio Systems;Multipoint Equipment and Antennas;Part 3: Harmonized EN covering the essential requirementsof article 3.2 of the R&TTE Directivefor Multipoint Radio Antennas. 0560 Česky [Czech] Dansk [Danish] Deutsch [German] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Gemtek 4G Wi-Fi Spot [Spanish] los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Gemtek 4G Wi-Fi Spot [Polish] Português [Portuguese] Slovensko [Slovenian] Slovensky [Slovak] Suomi [Finnish] wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. [Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.