User's Manual

8
Software Installation
Description
This procedure must be performed after the PC card or the ISA card is installed
on to the computer. There are two ways for software installation. Normally,
Windows will find the WL-201/WL-205 or WL-301 automatically. Just follow
the instructions to install driver. If not, please refer to the second way listing in
troubleshooting information.
Installation procedure
1. After the computer enters into WIN98/95, the WIN98/95 will recognize the
card automatically. It then displays a dialog box titled “New Hardware Found”.
Select the “Driver from disk provided by hardware manufacturer” and click
“OK” to bring out “Install From Disk“ dialog box.
2. Insert the utility diskette into the floppy disk driver. And type “ A:\ ” at copy
manufacturer‘s files from. Then click “OK”
4. The Computer will load software from Driver A automatically. Part of