Quick Installation Guide WLTMQ-117
Copyright © GEMTEK TECHNOLOGY Co., Ltd. 2015. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of GEMTEK TECHNOLOGY Co., Ltd. Trademarks and Permissions and other Gemtek trademarks are trademarks of GEMTEK TECHNOLOGY Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Quick Installation Guide Contents Contents Contents ............................................................................................................................................... i 1 Easy Setup ....................................................................................................................................... 1 1.1 Hardware 1.2 Login to Web GUI ...............................................................................................................................
Quick Installation Guide 1 Easy Setup 1 Easy Setup 1.1 Hardware Please follow the steps below to configure your device through the web interface: Qualcomm module-based evaluation kit requires a Windows® PC, running Windows XP or Window7 with an USB 2.0 port. It can also be used with a computer running Linux. 1.
Quick Installation Guide 1 Easy Setup 1.3 Connect and Disconnect LTE Connection Please follow the steps below to Connect or Disconnect LTE connection: Step1: Login to Web GUI Step2: Go to Mobile Network > Technology Step3: Click “Start” Button to Attach LTE Network Click “Stop” Button to Detach from LTE Network Proprietary and Confidential Copyright © Gemtek Technology Co., Ltd.
Quick Installation Guide 1 Easy Setup 1.4 Change APN Configuration Please follow the steps below to change APN configuration: Step1: Login to Web GUI Step2: Go to Mobile Network > Default PDN Step3: To change APN configuration, select APN for network attach to “Manual”, Step4: To change APN Name, please fill in APN Name text box Proprietary and Confidential Copyright © Gemtek Technology Co., Ltd.
Quick Installation Guide 2 Upgrade Firmware 2 Upgrade Firmware Upgrade Firmware is use to upgrade latest Firmware. Please follow below step for upgrade Firmware: Step1: Login to web GUI Step2: Go to Management > Software Step3: Click “Browse” button to select the ipkg file to upload, and then click “Upgrade” to install the selected file. The Upgrading window will be shown as below and then the reboot process will be started to let the change taken effect.
Quick Installation Guide 2 Upgrade Firmware FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Quick Installation Guide 2 Upgrade Firmware This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, As long as 2 conditions above are met, further transmitter test will not be required.