M5 Drop for System Test - June 26, 2011 Public Safety LTE USB Modem UM-1000 The entire document is available for System Text, except for the section "1.2.1 Inserting the SIM Card in the UM-1000." That section will be developed for final delivery at M3.
M5 Drop for System Test - June 26, 2011 M5 Drop for System Test - June 26, 2011
M5 Drop for System Test - June 26, 2011 Contents 1 USB Modem UM-1000............................................................................................................................... 1-1 1.1 UM-1000 System Requirements .......................................................................................................... 1-2 1.2 Installing the UM-1000 ...................................................................................................................... 1-2 1.2.
M5 Drop for System Test - June 26, 2011 This page is deliberately left blank.
M5 Drop for System Test - June 26, 2011 List of Figures Figure 1-1 Figure 1-2 Figure 1-3 Figure 1-4 Figure 1-5 Figure 1-6 Figure 1-7 Figure 1-8 Figure 1-9 Figure 1-10 Figure 1-11 Figure 1-12 Figure 1-13 Figure 1-14 Figure 1-15 Figure 1-16 Figure 1-17 Figure 1-18 Figure 1-19 Figure 1-20 Figure 1-21 Figure 1-22 Figure 1-23 Figure 1-24 USB Modem UM-1000 ..............................................................................................................
M5 Drop for System Test - June 26, 2011 This page is deliberately left blank.
M5 Drop for System Test - June 26, 2011 List of Tables Table 1-1 Table 1-2 Table 1-3 Table 1-4 Table 1-5 Table 1-6 System Requirements for the UM-1000 ......................................................................................... 1-2 Options Menu......................................................................................................................... 1-16 About and Exit Options .......................................................................................................
M5 Drop for System Test - June 26, 2011 This page is deliberately left blank.
M5 Drop for System Test - June 26, 2011 1 USB Modem UM-1000 Topics Covered in this Chapter • UM-1000 System Requirements • Installing the UM-1000 • Getting Familiar with the Main Window • Understanding the Buttons and Settings • Connecting to the PS LTE Network • Disconnecting from the PS LTE Network • UM-1000 Troubleshooting The USB Modem UM-1000 is a fully Plug and Play USB device, with all operating software pre-loaded on the USB device itself. No CD-ROM is required.
M5 Drop for System Test - June 26, 2011 1.1 UM-1000 System Requirements The following table lists the minimum system requirements for the USB Modem UM-1000. Table 1-1 System Requirements for the UM-1000 Specification Parameter OS Level Windows 7 or Windows XP SP3 Processor Speed 1.0 GHz Disk Space 40 MB RAM Requirement 1.0 GB USB Modem UM-1000 USB Modem UM-1000 1.
M5 Drop for System Test - June 26, 2011 1.2.2 Inserting the UM-1000 in the Computer Port 2 xxx a. xxx. b. xxx 3 xxx a. xxx b. xxx. Installing the UM-1000 1.2.2 Inserting the UM-1000 in the Computer Port This procedure explains how to install the USB Modem UM-1000 in the laptop computer. Perform this procedure after inserting the SIM card in the UM-1000. Procedure Steps 1 Insert the USB Modem UM-1000 into your laptop computer's USB port.
M5 Drop for System Test - June 26, 2011 1.2.3 Performing the UM-1000 Software Installation The USB Modem UM-1000 loads the Connection Manager software on your computer. This procedure describes the software installation process shown on your computer screen. Procedure Steps 1 Insert the USB Modem UM-1000 in the USB drive of your laptop computer if it isn't already there. Step result: The Welcome window appears.
M5 Drop for System Test - June 26, 2011 1.2.3 Performing the UM-1000 Software Installation 2 Click Next. Step result: The License Agreement window appears.
M5 Drop for System Test - June 26, 2011 3 Make sure that I accept the terms in the license agreement is selected, then click Next. Step result: The Destination Folder window appears. Figure 1-5 4 Destination Folder Window Do one of the following: a. If the folder location for the program installation is correct, click Next. b. To change the folder location, click Change, select the folder, then click OK and Next.
M5 Drop for System Test - June 26, 2011 1.2.
M5 Drop for System Test - June 26, 2011 5 In the InstallShiedl Wizard Completed window: a. The Launch Connection Manager check box is selected by default. Leave it selected if you want Connection Manager to automatically start when the installation is finished. Deselect this option if you do not want the program to automatically start. b. Click Finish.
M5 Drop for System Test - June 26, 2011 1.3 Getting Familiar with the Main Window When the UM-1000 is not connected to the network, the Motorola logo is gray and the button label shows Connect, indicating that clicking it will connect to the network. Figure 1-9 Main Window Showing a Network Connection When the UM-1000 is connected to the network, the Motorola logo is blue and the button label shows Disconnect, indicating that clicking it will disconnect from the network.
M5 Drop for System Test - June 26, 2011 Figure 1-10 Main Window Elements — SHOW WITH CALLOUTS TO ELEMENTS Toolbar The toolbar, toward the top of the window, contains an Options button, a Help button, a History button, and a Down Arrow button with more choices (About and Exit). Place your mouse cursor over a button to see its name. For more information, see 1.4 Understanding the Buttons and Settings, page 1-14.
M5 Drop for System Test - June 26, 2011 1.3 Getting Familiar with the Main Window Figure 1-11 Toolbar Buttons — ADD CALLOUTS TO BUTTONS Connection Information The Connection Information area in the center of the window contains information about the connection. For example, the gray Motorola logo indicates there is no network connection, as explained earlier.
M5 Drop for System Test - June 26, 2011 Figure 1-12 Main Window with No Device Detected Connection Button The Connection Button Area, toward the bottom of the window, shows one of two states: • Connect — This means there is no active network connection currently. Clicking Connect will initiate a connection with the PS LTE network. • Disconnect — This means there is a connection with the PS LTE network. Clicking Disconnect will disconnect from the PS LTE network.
M5 Drop for System Test - June 26, 2011 1.3 Getting Familiar with the Main Window Figure 1-13 Status Area at Bottom of Window — INCLUDE CALLOUTS Context Menu If you right click on the Modem Connection icon (insert icon graphic) a menu appears with these items: • Settings • Disconnect • Statistics • Reset dongle • Diagnostics Settings To use this option, right click on the Modem Connection icon and select Settings.
M5 Drop for System Test - June 26, 2011 The Statistics window shows statistics for the current session in a tabular chart format. You can change the period of information shown in the chart to daily or monthly statistics. In the lower-left corner of the window is an Options link, which allows you to change how long statistics are saved for, such as three months or a year. Reset Dongle To use this option, right click on the Modem Connection icon and select Reset Dongle.
M5 Drop for System Test - June 26, 2011 1.4 Understanding the Buttons and Settings Figure 1-14 Main Window — Options Button (CALLOUT TO OPTIONS) The Connection Manager Options dialog box appears.
M5 Drop for System Test - June 26, 2011 Table 1-2 Options Menu Option Description Run Connection Manager when starting computer If this option is checked, Connection Manager automatically opens when the computer starts. If it is not checked, Connection Manager does not auto load when the computer starts up. Show main window when Connection Manager starts If this option is checked, the Main Window automatically shows when Connection Manager opens.
M5 Drop for System Test - June 26, 2011 1.4 Understanding the Buttons and Settings Figure 1-17 Main Window — History Button (CALLOUT TO HISTORY) The Connection Manager - History dialog box appears. A history list is shown with each item indicating the date, time and other information about a UM-1000 connection to the PS LTE network. For example, the “Stop Session Mobile Connection” event shows how much data was transferred before the session stopped.
M5 Drop for System Test - June 26, 2011 Figure 1-18 History Window — Viewing Information Changing History Options To change history settings, such as how long history is collected, click the Options button in the History window. Then click the Down Arrow and choose a setting. The choices are 1, 3, or 6 months, 1 year or forever. When finished, click OK. This window also has a button to Clear History.
M5 Drop for System Test - June 26, 2011 1.4 Understanding the Buttons and Settings Figure 1-19 History Window — Changing Settings Down Arrow on Toolbar Click the Down Arrow on the Main Window toolbar to see more selections, including About and Exit.
M5 Drop for System Test - June 26, 2011 Figure 1-20 Table 1-3 Main Window — Down Arrow (CALLOUT TO ARROW) About and Exit Options Option Description About Shows general information about Connection Manager, such as the version and year of the software. Exit Causes Connection Manager to close down. System Tray The Connection Manager application always appears in the System Tray when the program opens.
M5 Drop for System Test - June 26, 2011 1.5 Connecting to the PS LTE Network • Options shows the Connection Manager Options dialog box. • About shows the Connection Manager general information. • Exit closes the Connection Manager application. Notification Message Window There is a notification message window area above the System Tray, as shown here. Figure 1-22 Notification Message Window USB Modem UM-1000 USB Modem UM-1000 1.
M5 Drop for System Test - June 26, 2011 Procedure Steps 1 Make sure the Connection Manager program is open and the Main Window is visible. If the software was just loaded, the program may autostart with the Main Window displayed, as shown below. a. If Connection Manager is not open, double-click the program icon on your desktop. b. If the Main Window does not automatically show, click the minimized Connection Manager icon in the System Tray Step result: The Main Window appears.
M5 Drop for System Test - June 26, 2011 1.6 Disconnecting from the PS LTE Network 1.6 Disconnecting from the PS LTE Network This procedure explains how to disconnect from the Public Safety Long Term Evolution network. Procedure Steps 1 Make sure the Connection Manager program is open and connected to the PS LTE network. See 1.5 Connecting to the PS LTE Network, page 1-21. The Main Window displays a Disconnect button, indicating that it is currently connected to the network.
M5 Drop for System Test - June 26, 2011 1.7 UM-1000 Troubleshooting These tables list notifications, warnings and error messages that can appear in the Connection Manager Main Window for the USB Modem UM-1000. Table 1-4 Connection Manager Notifications — in Active Connection Area of Main Window Notification Description Required Action “Detecting device...” The Connection Manager is rescanning for the USB Modem UM-1000 device. This occurs after the operating system reported on the device.
M5 Drop for System Test - June 26, 2011 1.7 UM-1000 Troubleshooting USB Modem UM-1000 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
