Installation Instructions

E1000 Series Safety and Installation Instructions
SI-00101 v2 11
Lightning protection earthing point
The lightning protection earthing point is located on the back of the E10xx as
shown in Figure 6.
LTE Antennas
LTE antennas are not included with the E1010 or E1011 products. Customers
may use any omni-directional antenna that meets the following specification:
• gain in the operational frequency range ≤ 5.3 dBi
• VSWR ≤ 1.5
• Impedance: 50 Ω
LTE antennas may be included with the E1012/CBRS product. The included
omni-directional antenna meets the following specification:
• gain in the operational frequency range ≤ 6 dBi
• VSWR ≤ 1.5
• Impedance: 50 Ω
Customers wishing to use antennas outside this specification should contact
Accelleran.
Accessories
The E10xx is supplied with the following accessories (shown in Figure 7) which
are necessary for its installation and operation:
• GNSS antenna with 1.5 m cable and Type N male connector
• Power over Ethernet Plus (PoE+) injector
Figure 6 - Lightning protection earthing point