Installation Instructions

E1000 Series Safety and Installation Instructions
SI-00101 v2 13
Installation
The E10xx is designed to be installed outdoors but may also be installed
indoors. A pole mounting kit is supplied. If the E10xx is to be fixed to an interior
wall, an off the shelf VESA MIS-D 100 mounting bracket or similar may be used
(not supplied).
Installing the E10xx on a mounting pole
The E10xx should be mounted with the GNSS antenna connector at the top.
A standard kit is included for mounting the E10xx onto a pole. The components
of the mounting kit are shown in Figure 8.
The mounting procedure is shown in Figure 9.
Figure 8: Components of the supplied mounting kit
Figure 9: Mounting procedure