User's Guide

TDD LTE Small Cell User Guide

Note that the following chapters (4.2.3 & 4.2.4) are the settings with multiple small cells. Thus, if you

are X-cell, you can ignore these parts.

4.2.3 LTE Configuration | Neighbor List

Before adding neighbors, you first have to check the frequency is intra or inter. If the

neighbor is an intra-frequency neighbor, you can directly add a neighbor cell under the

frequency of the eNodeB. If no cells are added, ANR will still be working to add any

neighbor cell that UE reports to the neighbor relation table of this eNodeB.

Edit the information of the neighbor cell, especially the Cell ID, PHY cell group ID, PHY

Cell ID, and Bandwidth. If X2 HO is not needed, IP, Port, eNB Type, eNB ID, MCC, MNC,

and MME CGI can be ignored. After edited, press the Update button to apply the

changes. And don’t forget to save your changes.