User's Guide

TDD LTE Small Cell User Guide
43
5. All-In-One Small Cell (X-Cell) Web Management
Interface Reference Manual
Since the web management of the All-In-One small cell (X-cell) is the same except for
the “EPC” icon. Please follow “Chapter 3.2.2Modify Configuration” to modify the X-cell
configuration parameters. The following part is the settings of the embedded EPC.
5.1 EPC
5.1.1 EPC | EPC-MME Configuration
Select list item – EPC | EPC-MME Configuration, You can set MME code, APN and UE Start
IP for EPC. Then, you can select LTE MQTT status and Time Zone.
1. Click ‘EPC’ tag.
2. Click ‘EPC-MME’ Configuration
3. Please base on your test environment to configure these parameters for MME.
i. MME Code : 1~255
ii. APN : The max length is 64
iii. UE Start IP : UE IP Address
iv. LTE MQTT: This is for special application use only. Please don’t enable it. If enable
it, it will reduce the system throughput performance.
v. Time Zone: The value is assigned to UEs after UEs have attached completed.
4. If you update the value, you must reboot the system.
This field name must be the same
as the cell phone's APN