User's Guide

10
(3) Battery LED indicates as follows
OFF : Not Charging Red LED : Charging Green LED : Fully Charged
CAUTION
Do not use any other charger except one (5.0V / 5.0A) provide.
Make sure to handle it gentle; damage with excessive force may cause no warranty.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according
to the instructions.
When attached battery is completely discharged, plug charger to main body, then reset the device to
check if screen is back on.
B. To charge with the direct Micro USB.
(1) Use a USB charger to charge the terminal from a power outlet or connect the cable to a
high-power USB port to charge from a host device.
(2) Insert the micro 5pin jack in the micro 5pin hole.
(3) The Charging/Battery Status LED red while charging, then turns LED green when fully charged.
OFF : Not Charging Red LED : Charging Green LED : Fully Charged
CAUTION
Adapter voltage must be 5V and current is 2A or higher recommended.
Charging the battery though a USB port of PC or laptop, or using non recommended output adaptor
takes more time.
When you use the device for the first time or after not using for long period of time, please charge
enough time before using.
Even though you connect the charger, the device may not turn on in the very low voltage state.
Please charge the device for 30 minutes ~ 1 hour first.
The device will turn on automatically and the charge LED will turn on red.
4) Power
A. Power on the Device
Press the Power button to turn on the device.
Android Logo appear on a screen, and the Power LED turns on after a short while.