User's Guide

9
(4) Cover the locker and slide it downwards to lock it until when you hear a “click” sound.
(5) Put the cover on the RP70A BIO and tighten the screws.
B. “SIM, SAM or Micro SD cards” can be removed in the reverse order.
Caution : If you install or change SIM card when device is turned on, you should reboot
the device afterward.
3) Charging the Device
Before using the RP70A device for the first time, charge the main battery until the green
Charging/Battery Status LED remains lit (see below picture for charge status indications).
To charge the device, use a cable or a cradle with the appropriate power supply.
A. To charge with the direct DC jack.
(1) Open the “USB & DC Jack” Cover.
(2) Insert the DC Jack in the DC Jack hole.