Elite SERIES UTP-30B/UTP-60B 144/288-LAMP ULTRA THIN BI-COLOR SMD LED USER MANUAL
Thank you for choosing Genaray. UTP-30B/UTP-60B INTRODUCTION The UTP series of LED lights features surface-mount (SMD) LED technology that furnishes a powerful, highoutput beam. The Elite 144- and 288-LED ultra-thin light fixtures provide flicker-free, continuous illumination. These lightweight, camera-mountable lights deliver outstanding brightness with precise color accuracy. The lights are designed with an integrated 99-channel 2.
UTP-30B UTP-60B UTP-60B-KA UTP-60B-KS · Light fixture · Light fixture · Light fixture · Light fixture · Barndoors · Barndoors · Barndoors · Barndoors · Shoe adapter · Battery (×2) · AC power cord · Shoe adapter · Dual charger · Shoe adapter · AC power cord · Handle mount · Light stand adapter · Shoe adapter · Light stand adapter · Handle mount · Light stand adapter PRODUCT CONTENTS PRODUCT CONTENTS · Wireless remote · Soft case · Wireless remote · Soft case Ultra Thin Bicolor SMD
LED display Brightness indicator Plus/minus buttons Color temperature indicator PRODUCT OVERVIEW LED array Power button Mode button 1/4-20 mounting socket Battery compartment DC input 1/4-20 mounting socket 4 Ultra Thin Bicolor SMD LED USER MANUAL Barndoors
Guide pin 1/4-20 screw Light Stand Adapter (UTP-60B) Handle Mount (UTP-60B/ KA) Locking wheel PRODUCT OVERVIEW Locking knob 5/8˝ bidirectional receiver Shoe Adapter Locking knob Shoe mount Ultra Thin Bicolor SMD LED USER MANUAL 5
PRECAUTIONS PRECAUTIONS 6 · Please read and follow these instructions, and keep this manual in a safe place. · Handle the unit with care. · Keep this unit away from water and any flammable gases or liquids. · Clean the unit with only a soft, dry cloth. · Make sure the unit is powered off when plugging it into a power source. · Use only parts provided by the manufacturer. · Use only the correct, recommended voltage. · Make sure the item is intact and that there are no missing parts.
MOUNTING THE LIGHT ONTO A CAMERA 1. Align and screw in. INSTRUCTOONS 2. Mount to your camera. 3. Adjust the angle. Note Mounting the UTP-60B vertically with the extra weight of batteries can potentially damage your camera’s shoe. For vertical mounting, we recommend mounting the UTP-60B on a light stand with the included light stand adapters.
MOUNTING THE LIGHT TO A LIGHT STAND UTP-30B INSTRUCTIONS 1. If your light stand isn’t equipped with a 1/4-20 mounting stud, insert a 5/8˝ spigot or a ball head (not included) with a 1/4-20 mounting post. 2. Screw the light onto the light stand until it’s secure. UTP-60B 1. Fit the light stand adapter over the light stand’s 5/8˝ post, and tighten the locking wheel until it’s secure. 2. Mount the UTP-60B vertically or horizontally to the light stand adapter. 3.
USING THE HANDLE MOUNT (UTP-60B/KA) INSTRUCTIONS For handheld operation of your UTP-60B, follow these steps: 1. Align the 1/4-20 post and guide pin with the appropriate sockets on the sides or bottom of the light. 2. Screw in the handle mount by turning the locking wheel until secure.
POWERING THE LIGHT INSTRUCTIONS The UTP-30B and UTP-60B run on NP-F style batteries, and they can be powered directly from an AC outlet. AC Power Note The multivoltage AC adapter (UTP-60B only) runs on 100 to 240 V, 50/60 Hz. The included cable has a 2-prong (US) plug. To use this fixture in other countries or different style wall outlets, you must use a plug adapter (sold separately). Always use the included AC adapter to connect the light’s power socket to an AC outlet.
Charging the batteries: You can check how much battery power is remaining by following these steps: The batteries included with the UTP-60B light come with their own dual charger. To charge the batteries: 1. With the light‘s power on, press the power button. 2. The remaining percentage of battery power will blink on the LED screen. 3. Press the power button again to return to normal operation. INSTRUCTIONS Checking the battery power: 1.
OPERATING YOUR LIGHT INSTRUCTIONS Open the barndoors, and press and hold the power until the LED array turns on. The LED display will show the last settings that were used. Modifying the Light Output The brightness ranges from 10 to 99 (10% to full brightness). To set the light’s brightness, follow these steps: 1. Turn on the power. 2. Press the mode button so the brightness indicator appears on the screen. 3. Press the + or - buttons to raise or lower the value by one-unit increments.
SHAPING THE LIGHT WITH THE BARNDOORS SETTING THE CHANNEL The UTP-30B and UTP-60B feature a 2.4 GHz receiver that enables them to be operated by the Genaray MB-WRT wireless remote (included with UTP-60B). The remote can control your lights from up to 98 feet (30 m) away. The lights offer 99 channels for controlling setups with multiple lights and preventing interference from other remote devices in your area. To set the channel, follow these steps: 1.
INSTRUCTIONS STORING THE LIGHTS When you’re finished using the light, power it off by pressing and holding the power button until the LED array and LED display turn off. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: Remove the power cord or the batteries from the light, and close the barndoors to protect the light during transport and storage. If the light is warm, allow a few minutes for it to cool down. 1.
UTP-30B UTP-60B Output power 15 W 3200 K, 15 W 5600 K 30 W 3200 K, 30 W 5600 K Lux (@ 3 ft.) 3200 K: >270 3200 K: >585 5600 K: >280 5600 K: >635 3200 K: >90 3200 K: >90 5600 K: >90 5600 K: >90 Color temperature 3200 to 5600 K 3200 to 5600 K Dimmer 10% to 100% 10% to 100% Light source SMD LED SMD LED Bulb life 50,000 hr. 50,000 hr. Wireless receiver Built-in 2.4 GHz receiver, 99 channels Built-in 2.
ONE-YEAR LIMITED WARRANTY This GENARAY product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.