User Manual

Contender LED Fresnel Spot Focusing Light - USER MANUAL
10
MOUNTING THE
CONTENDER
The Contender can be mounted directly to
a light stand, a tripod head with an Arca-
style clamp, or the included ball head.
LIGHT STAND
The Contender is equipped with
1/4- and 3/8-inch threaded receivers.
To mount the contender directly to a
light stand, screw the Contender onto
the light stand’s threaded post.
ARCA-STYLE CLAMP
Loosen the locking knob of the Arca-
style clamp and slide the Contender’s
mounting plate into the clamp. Tighten
the locking knob until the Contender is
secure and doesn’t move in the clamp.
BALLHEAD
Screw the ballhead onto the light stand.
Note: The ball head comes with a 3/8- to
1/4-inch adapter bushing installed. If your
light stand has a 3/8-inch threaded post,
remove the bushing to attach the ballhead.
Screw the ballhead’s 1/4-inch
post into the Contender.
Make sure the ballhead’s locking
handle is securely tightened before
you let go of the Contender.
Ballhead feature: The locking handle
is a ratchet-style handle. If you are
using the ballhead in a tight space that
doesn’t allow you to fully rotate the
handle, pull the handle out, reposition
it, and let it snap back into place.
instructions