User Manual

MOUNTING LIGHT
UNIT DIRECTLY ON
CAMERA OR TRIPOD
MOUNTING
LIGHT UNIT ON
BALL HEAD MOUNT
LED-6200T - USER MANUAL
8
· Ensure that locking collar is fully loosened
and slide cold shoe mounting into shoe of
camera; rotate collar clockwise to lock light
in place securely
· For tripod installation, simply insert 1/4 20
screw found on tripod head into the 1/4 20
threading mount found on bottom of unit;
then tighten securely
Light can also be fastened
to included ball head mount,
which can then be installed on
cold shoe found on cameras or
similar devices; see ball head
mounting instructions
Note
· Included ball head mount is designed to
provide user with a 180° tilt/360° rotating
angle feature that can be used on both
cameras and other devices featuring a cold
shoe
· Begin by inserting 1/4 20 screw found atop ball
head mount into the 1/4 20 threading found on
bottom of LED light unit and fasten securely
· Tighten adjustment locking knob so light
unit does not wobble during remainder of
mounting process
· Ensure cold shoe foot is firmly secured to ball
head mount device and loosen locking collar
found on base of ball head device
· Slide entire male cold shoe into female cold
shoe of camera or other mounting device; then
fasten locking collar securely
INSTRUCTIONS