User Manual

INTERLOCKING WITH
OTHER LED DEVICES
LED-6200T - USER MANUAL
9
· Ensure that device locking collar is fully
loosened and slide cold shoe mounting
into interlocking expansion slot of another
compatible Genaray LED light; rotate collar
counterclockwise to lock in place securely
· Up to 3 compatible Genaray LED light
devices can be mounted to the top and sides
of each individual light device or mounted
in a stacked vertical format for increased
illumination
· Loosen adjustment locking knob by
twisting counterclockwise and rotate ball
head mount to position light at desired
angle; twist locking knob clockwise to hold
light unit firmly in position
Cold shoe mount can also
be removed to reveal an
integrated1/4 20 threading
mount
· To reveal ball head mount's integrated 1/4
20 threading mount for fastening to tripod,
twist locking ring resting above cold shoe
counterclockwise until entire shoe comes
out; insert 1/4 20 screw found on tripod
head into the 1/4 20 threading mount; then
tighten securely
Note
INSTRUCTIONS