LED-6500T 209 LED VARIABLE COLOR ON-CAMERA LIGHT USER MANUAL
Thank you for choosing the Genaray LED-6500T LED-6500T INTRODUCTION On-Camera Light. This product will provide you with powerful, portable and dependable illumination that can be used in a variety of settings.
· 3200K-5600K Variable Color Temperature · Lightweight Design With Powerful 209 Lamp Count PRODUCT CONTENTS · 209 LED Light · Magnetic Diffuser · NP-F550 Battery · AC/DC Battery Charger · Compact Profile & Case For Easy Transport · AC Adapter · Removable Snap-On Magnetic Diffuser · Ball Head Mount · Car Adapter · Built-In Battery Life Indicator · Carrying Case · Vertically Stackable · Manual 3 LED-6500T - USER MANUAL FEATURES KEY FEATURES
SAFETY WARNINGS SAFETY WARNINGS · Do not attempt to disassemble, repair or perform any unauthorized modifications on device · Do not handle with wet hands, immerse in liquids or expose to water and rain; electric shock or fire may result · Device contains small parts which may pose a choking hazard; keep out reach of children · Do not operate device in presence of flammable gas or vapors 4 LED-6500T - USER MANUAL · Do not use product if it emits smoke or a strange odor; disconnect power source immediate
· During operation, do not cover the ventilation grille found at the rear of device and ensure light is cool before storing · Do not use or leave device in conditions of extreme heat, severe cold or high humidity · Unit will display a decrease in brightness when the battery runs 5 LED-6500T - USER MANUAL low; be sure to replace battery when necessary to avoid affecting recording quality · When cleaning the device, use only a mild detergent solution and quickly wipe dry with a soft cloth · Dispose of used
PRODUCT OVERVIEW Stacking Release Button Filter Mounting Magnet 1/4 20 Threaded Mount LED Array 6 LED-6500T - USER MANUAL Included Ball Head Mount
Stacking Rail Slots Battery Release Button Color Variation Knob 7 Battery Level Indicator LED-6500T - USER MANUAL DC Input Power & Dimming Knob PRODUCT OVERVIEW Battery Mounting Area
MOUNTING LIGHT UNIT DIRECTLY ON TRIPOD INSTRUCTIONS · For tripod installation, simply insert 1/4 20 screw found on tripod head into the 1/4 20 threading mount found on bottom of unit; then tighten securely Note 8 Light can also be fastened to included ball head mount, which can then be installed on cold shoe found on cameras or similar devices; see ball head mounting instructions LED-6500T - USER MANUAL MOUNTING LIGHT UNIT ON BALL HEAD MOUNT · Included ball head mount is designed to provide user wi
· Loosen adjustment locking knob by twisting counterclockwise and rotate ball head mount to position light at desired angle; twist locking knob clockwise to hold light unit firmly in position Note · 9 Cold shoe mount can also be removed to reveal an integrated1/4 20 threading mount To reveal ball head mount's integrated 1/4 20 threading mount for fastening to tripod, twist locking ring resting above cold shoe counterclockwise until entire shoe comes out; insert 1/4 20 screw found on tripod head into t
POWERING DEVICE INSTRUCTIONS · · 10 Begin by holding fully-charged battery in position over mounting area, leaving only a small gap between conductor contacts found on battery and metal prongs found on unit Push battery down and lock into place by sliding it inwards along grooves until an audible click is heard · Twist the power & dimming switch clockwise to turn LED lights on · Press the built-in battery level indicator button to instantly view the power remaining in the battery; each indicator ci
· · PRODUCT SPECIFICATIONS To adjust the 3200K-5600K variable color temperature range, simply rotate color variation knob until desired effect is achieved Bulb Type: 110 Daylight and 99 Tungsten LED To adjust the flicker-free dimmable features, simply rotate the power & dimming knob until desired effect is achieved To install magnetic snap-on diffusion filter, hold diffuser over LED panel with silver magnetized posts facing inwards; then quickly snap it into place Brightness: 900 lux @ 3' Color Temper
ONE-YEAR LIMITED WARRANTY This GENARAY product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.