MonoBright™ WIRELESS TRANSMITTER USER MANUAL MonoBright Wireless Transmitter - USER MANUAL 1
Thank you for choosing Genaray. MonoBright WIRELESS TRANSMITTER INTRODUCTION The Genaray MB-WRT MonoBright Wireless Transmitter is a dedicated remote control for Genaray MonoBright LED lights. With the ability to use any of 99 channels, the transmitter operates at 2.4 GHz to provide up to 98′ (30 m) of untethered freedom. The MB-WRT Wireless Transmitter facilitates color temperature adjustment from 32–56 K (±300 K) on Bi-Color units, as well as brightness adjustment from 100%–10% on any MonoBright model.
PRECAUTIONS · Please read and follow these instructions and keep this manual in a safe place. · Keep this product away from water and any flammable gases or liquids. · Do not attempt to disassemble or repair this product. · Always install AAA batteries of the same type and age. Do not combine different types or old and new batteries. This can cause the batteries to leak, overheat, or explode. · Install the batteries in the proper orientation, as indicated by the markings in the battery compartment.
Status LEDs Transmitting indicator LED PRODUCT OVERVIEW Display Power button Minus (-) button Mode button Plus (+) button Power Output Blue ( ) MonoBright Wireless Transmitter - USER MANUAL Channel None Press the Mode button to cycle through the three modes. The status LEDs indicate the current mode.
TURNING ON THE TRANSMITTER AND SETTING THE CHANNEL The wireless transmitter runs on two AAA batteries (available separately). Install the batteries in the proper orientation. Before using the transmitter, make sure your MonoBright is turned on. To turn on the transmitter, press the transmitter’s power button. To set the transmitter’s channel, follow these steps: 1. Make sure the transmitter and the MonoBright are set to the same channel.
ADJUSTING COLOR TEMPERATURE INSTRUCTIONS You can use the transmitter to wirelessly adjust the color temperature of one or more MonoBright Bi-Color units from 3200–5600 K (±300 K). When wirelessly adjusting multiple MonoBright Bi-Colors, you can change the color temperature uniformly or use the transmitter’s 00 channel mode to adjust them simultaneously at separate color temperatures.
To set the color temperatures: You can set multiple MonoBright Bi-Color units at varied color temperatures to create a visual palette with tones and shadings of light and color. Doing this can add nuance and enhance the mood of your imagery, even when shooting in black and white. 1. Set each MonoBright unit to a different channel. You can do this via their control panels.
INSTRUCTIONS Note: The MonoBright’s color temperature setting will appear on the control panel’s display only if the MonoBright’s control panel is set to color temperature mode. b. 8 Press the transmitter’s mode ( ) button repeatedly to cycle through the modes until the transmitter’s orange ( ) status LED glows to indicate color temperature mode. Use the transmitter’s plus ( ) and minus ( ) buttons to adjust the MonoBright’s color temperature. MonoBright Wireless Transmitter - USER MANUAL 3.
WIRELESSLY ADJUSTING POWER OUTPUT Uniform Power Output: You can use the transmitter to wirelessly adjust the power output of one or more Genaray MonoBright units, setting them to the same output. To adjust the power output via the transmitter, follow these steps: 1. If you are using multiple MonoBright units, make sure they and the transmitter are all set to the same channel. 2.
Multiple Power Outputs: INSTRUCTIONS You can create a sophisticated lighting setup by positioning MonoBright units individually or in groups to function as main, fill, accent, and other lights. Setting the units at different power outputs to achieve specific looks affords a professional level of creative control. When using multiple MonoBright units at different output settings, you can adjust them incrementally with a single transmitter while maintaining the difference in their outputs.
b. Press the transmitter’s mode ( ) button repeatedly to cycle through the modes until the transmitter’s blue ( ) status LED glows to indicate output mode. Use the transmitter’s plus ( ) and minus ( ) buttons to adjust the MonoBright’s output. c. Repeat steps 2a and 2b for the other MonoBright units in your lighting setup. 3. Set the transmitter’s channel to 00 and firmly press the transmitter’s power ( ) button to confirm. INSTRUCTIONS will glow.
SLEEP MODE MonoBright: INSTRUCTIONS The MonoBright incorporates a sleep mode that is activated by the transmitter. To activate the MonoBright’s sleep mode, press and hold the transmitter’s power ( ) button in output mode until the MonoBright’s LED turns off and “OF” appears on the displays of both the MonoBright and the transmitter. Tip: You can also do this in 00 channel mode to simultaneously activate sleep mode on all your MonoBright units.
PRODUCT SPECIFICATIONS Frequency: 2.4 GHz SPECIFICATIONS Working distance: 98′ (30 m) Functions: On/off, dimming, channel selection, color temperature selection Power: Two AAA batteries (not included) Dimensions (H × W × D): 3.4″ × 1.8″ × 1″ (8.6 × 4.5 × 2.54 cm) Weight: With batteries: 2.5 oz. (72 g) Without batteries: 1.7 oz.
FCC STATEMENT FCC STATEMENT This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
MonoBright Wireless Transmitter - USER MANUAL 15
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
