Full Moon 18 IN.
THANK YOU FOR CHOOSING GENARAY Full Moon INTRODUCTION The Genaray Full Moon LED light provides photographers and videographers with a natural and soft yet ultra-bright continuous light source in a thin, portable fixture. This 1280-LED fixture can operate on AC or battery power, and it features flicker-free dimming from 100% to 10% with broad coverage. The built-in diffuser furnishes a soft wraparound quality and eliminates the multiple shadows that are often associated with LED lighting.
PRECAUTIONS · Handle the unit with care. · Keep this unit away from water and any flammable gases or liquids. · Do not attempt to disassemble or repair the equipment—doing so will void the warranty, and Genaray will not be responsible for any damage. · Make sure the unit is powered off when plugging it into a power source. · Do not stare directly at the lights when they are powered on. · Do not use 26-volt V-Mount batteries with this fixture. Doing so will damage the unit and void the warranty.
Tilt adjustment knob PRODUCT OVERVIEW Diffuser Yoke Locking knob 4 Full Moon 18 in.
Handle Channel/ DMX address display Battery status indicator Vents V-mount battery plate V-mount release button Brightness Color temperature Product Overview Fan LCD screen Color temperature knob Fan on/off switch DMX input port 3-pin XLR power socket DMX output port Power switch I - DC (battery) power O - Off II - AC (plug-in) power Dimmer/Channel knob DMX control button Channel/DMX address select button Color temperature quick adjust (+ or – 400 K) Full Moon 18 in.
CONTENTS INCLUDE · LED with yoke · AC adapter Contents · Power cord · User manual · Carry case MOUNTING THE RSF-18 Mount the RSF-18 on any heavy-duty light stand with a 5/8-inch baby-pin stud, and turn the locking knob until secure. 6 Full Moon 18 in. Bi-Color LED Light - USER MANUAL POWERING THE RSF-18 The RSF-18 can be powered directly from an AC outlet or by two V-mount batteries (not included).
USING THE RSF-18 WITH BATTERY POWER ADJUSTING BRIGHTNESS AND COLOR TEMPERATURE Important Use only V-mount batteries with a maximum of 14.8 volts per battery. Two V-mount batteries must be attached to operate the RSF-18 on battery power. Power the RSF-18 on. The LCD screen will show the last setting that was used. When attaching the batteries, make sure the power switch is in the off position, and the fixture is not plugged into a wall outlet.
USING THE MB-WRT WIRELESS TRANSMITTER Instructions The MB-WRT Wireless Transmitter (sold separately) facilitates color temperature adjustment from 3200 to 5600 K as well as brightness adjustment from 100% to 10%. The MB-WRT can operate the RSF18 at a distance of up to 98 feet (30 m). You can also control color temperature or brightness on multiple units that are set at different values, making this a convenient tool for use in a sophisticated lighting setup.
USING DMX Note When the RSF-18 is in DMX mode, the adjustment dials are disabled. Adjust the brightness and color temperature via the DMX console. To setup DMX operation on the RSF-18, follow these steps: 1. Use a 3-pin XLR cable to connect a DMX controller to the RSF-18 input port. 2. Use the RFS-18 output port to connect multiple lights. Instructions The RSF-18 supports DMX-512 so the light’s setting can be remotely controlled from a DMX control console. 3.
PRODUCT SPECIFICATIONS LED Count: 1280 Specifications Color Temperature: 3200 to 5600 K Luminance: 7000 lx @ 3 ft. Coverage: 120° Battery Type: 14.4-14.8 V V-mount battery (×2) Mount: 5/8 in. baby pin CRI: 97 Dimensions with yoke: 23.4 × 22.1 × 2.9 in. (59.5 × 56.2 × 7.4 cm) TLCI: 96 Weight (without battery): 11 lb. (5 kg) Output Power: 200 W 10 Working voltage: AC: 100–240 V DC: 26 V Full Moon 18 in.
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG3