User Manual

Full Moon 18 in. Bi-Color LED Light - USER MANUAL
7
USING THE RSF-18 WITH
BATTERY POWER
Important
Use only V-mount batteries with a
maximum of 14.8 volts per battery. Two
V-mount batteries must be attached to
operate the RSF-18 on battery power.
When attaching the batteries, make sure
the power switch is in the off position, and
the fixture is not plugged into a wall outlet.
To turn on the fixture, move the
power switch to the I position.
The battery status indicator on the LCD
screen displays the remaining battery power.
OPERATING THE
RSF-18
ADJUSTING BRIGHTNESS AND
COLOR TEMPERATURE
Power the RSF-18 on. The LCD screen
will show the last setting that was used.
After powering on the RSF-18, set the
brightness and color temperature by
rotating the knobs on the back of the fixture.
Color temperature can be adjusted from
3200 to 5600 K in 100 K increments.
Brightness can be adjusted from
100% to 10% in 1% increments.
For quieter operation, turn the fans
off via the fan on/off switch.
Note
The maximum brightness is capped at
80% when the fans are turned off. If the
brightness was previously set to over 80%,
it will be immediately reduced to 80%.
4/4 100% to 75%
4/3 75% to 50%
4/2 50% to 25%
1/4 25% to 10% (light will not operate 10%)
instructions