SpectroLED 14 Flood Light USER MANUAL
THANK YOU FOR CHOOSING GENARAY SPECTROLED 14 FLOOD LIGHT INTRODUCTION 2 The Genaray SpectroLED 14 LED Flood Light fixture provides photographers and videographers with a bright and continuous daylight-balance light source with broad 120° coverage. This 120 W LED fixture can operate on AC or battery power, and it features flicker-free dimming from 100% to 10% along with a high CRI for precise color accuracy and rendering.
PRECAUTIONS · Keep this unit away from water and any flammable gases or liquids. · Make sure the unit is powered off when plugging it into a power source. · Use only the correct, recommended voltage. · Handle the unit with care. · Do not attempt to disassemble or repair the equipment—doing so will void the warranty, and Genaray will not be responsible for any damage. Precautions · Please read and follow these instructions, and keep this manual in a safe place.
Angle adjustment knob SPECTROLED 14 FLOOD LIGHT OVERVIEW Flex rod holes 4 SpectroLED-14 Flood Light - USER MANUAL
LED screen Product Overview Umbrella socket Power switch Two-pin connection Locking knob Dimmer knob SpectroLED-14 Flood Light - USER MANUAL 5
CONTENTS INCLUDE · Light with 5/8 in. mount · AC adapter Contents · Power cord · Diffuser cap · User manual 6 SpectroLED-14 Flood Light - USER MANUAL MOUNTING THE SPECTROLED 14 Mount the SpectroLED 14 on any heavyduty light stand with a 5/8-inch baby-pin, and turn the locking knob until secure.
POWERING THE SPECTROLED 14 USING THE SPECTROLED 14 WITH AC POWER Important! The SpectroLED 14 is a multivoltage fixture capable of running on 100–240 V, 50/60 Hz. The included cable has a 120 V, 50 Hz (North American) plug. To use this fixture with other voltages, you must use a plug adapter (sold separately). USING THE SPECTROLED 14 WITH BATTERY POWER The SpectroLED 14 can be powered by a V-mount battery.
ADJUSTING THE BRIGHTNESS Instructions Rotate the dimmer knob to increase the brightness to 100% or to decrease the brightness to 10%. The brightness output will show on the LED screen. MOUNTING AN UMBRELLA Important! Make sure the light is turned off before mounting an umbrella. Insert the umbrella into the umbrella socket located in the center of the LED array. Adjust the umbrella as necessary. The pressure from the umbrella socket will hold the umbrella in place.
WIRELESS OPERATION SELECTING A CHANNEL 1. Press and hold the dimmer knob. The channel number and the LED array will blink. Important! Make sure the Genaray Wireless Remote is set to the same channel as the SpectroLED 14. For more information, refer to the Wireless Remote’s user manual. Instructions The SpectroLED 14’s dimmer can be controlled wirelessly with the Genaray MB-WRT Wireless Remote (not included). 2.
PRODUCT SPECIFICATIONS Specifications LED Count: 600 Mount: 5/8 in. baby pin LED Type: Surface mount (SMD) Diameter: 14.5 in. (36.8 cm) Color Temperature: 5600 K Depth: 7 in. (17.8 cm) Luminance: 4000 lx @ 1 m Power Cable Length: 13 ft. (4 m) Beam Angle: 120° Weight: 3.5 lb. (1.6 kg) CRI: 96.3 TLCI: 92.7 Output Power: 120 W Working voltage: AC: 100 to 240 V DC: 14.
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG1