SRL-10 SpectroLED USER MANUAL SpectroLED - USER MANUAL 1
THANK YOU FOR CHOOSING GENARAY. The Genaray Soft Ring Light LED provides photographers and SpectroLED INTRODUCTION videographers with ultrabright yet soft continuous light. This 120LED fixture can operate on AC or battery power, and it features flicker-free light from 100% to 10% with an even 75° beam angle. The built-in diffuser and the recessed placement of the LEDs within the fixture contribute to a bright and punchy light that also has a soft wraparound quality.
· Please read and follow these instructions, and keep this manual in a safe place. · Handle the unit with care. · Keep this unit away from water and any flammable gases or liquids. · Clean the unit with only a soft, dry cloth. · Make sure the unit is powered off when plugging it into a power source. · All images are for illustrative purposes only. PRECAUTIONS PRECAUTIONS · Do not stare directly at the lights when they are powered on. · Use only the correct, recommended voltage.
Front diffuser (not removable) PRODUCT OVERVIEW Tilt locking knob Yoke Locking knob 4 SpectroLED - USER MANUAL 5/8 in.
Dimmer indicator Battery indicator Color temperature indicator PRODUCT OVERVIEW Power/dimmer knob Color temperature knob Battery release button Yoke locking knob Battery DC input Also included: Ratchet handles Locking knob Rail mounting bracket • Dual charger • Charger power cord • Cigarette lighter charging cable • AC adapter • AC power cord • Carry case and shoulder strap SpectroLED - USER MANUAL 5
MOUNTING TO A ROD SYSTEM INSTRUCTIONS The mounting bracket that comes with the SRL-10 is compatible with 15 and 19 mm rod support systems. To mount the SRL-10 to a rod system, follow these steps: 1. Align the mounting bracket with the four holes at the base of the fixture. Make sure that the solid side of the bracket is facing away from the fixture, and that the correct rail size extends below the bottom of the light fixture. 2.
MOUNTING TO A LIGHT STAND OR TRIPOD 1. Attach the yoke to the threaded side sockets with the included washers and attachment screws. 2. Loosen the yoke’s locking knob, and fit the mount over the light stand’s 5/8-inch baby-pin stud. Turn the tightening screw until secure. Alternate method: The yoke can also be mounted onto a light stand with a 1-inch junior-pin receiver. Remove the locking knob, and insert the mount into the receiver. Secure the yoke with the light stand’s locking knob.
POWERING THE SRL-10 INSTRUCTIONS The SRL-10 can be powered directly from an AC outlet or by one or two NP-F style batteries (included). Using the SRL_10 with AC Power Important! The SRL-10 is a multivoltage fixture capable of running on 100–240 V, 50/60 Hz. The included cable has a 120 V, 50 Hz (North American) plug. To use this fixture with other voltages, you must use a plug adapter (sold separately). Connect the AC power adapter to the SRL-10, and then use the power cable to connect it to an outlet.
1. Make sure the power switch is in the Off position, and the fixture is not plugged into a wall outlet. Power the SRL-10 on by turning the power knob. The LCD screen will show the last color temperature setting that was used. 2. Place the battery down into the battery compartment. Make sure the battery contacts face the contacts in the battery compartment. After powering on the SRL-10, set the brightness and color temperature using the knobs on the back of the fixture. 3.
PRODUCT SPECIFICATIONS SPECIFICATIONS LED count: 120 Color temperature: 3200 (±200) to 5600 K (±300 K) Luminance: 900 lx @ 0.5 m DC: 7.4 to 14 V Battery type: NP-F style rechargeable lithium-ion battery Coverage: 75° Mount: Bracket for 19 and 15 mm rail systems CRI: 93 1/4 in. sockets, 5/8 in baby receiver and 1⅛ junior pin TLCI: 93 Dimensions: Diameter: 10 in. (25.4 cm) Output power: 30 W 10 Working voltage: AC: 100 to 240 V SpectroLED - USER MANUAL Depth: 1.25 in. (3.2 cm) Weight: 2.15 lb.
ONE-YEAR LIMITED WARRANTY WARRANTY This GENARAY product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
SpectroLED - USER MANUAL GG1
